AutoCodesChevrolet – P10C8 2014 Chevrolet Silverado

P10C8 2014 Chevrolet Silverado Code - Reductant Temperature Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Reductant Temperature Sensor, Reductant Temperature Sensor harness is open or shorted, Reductant Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P10C8 2014 Chevrolet Silverado indicates Reductant Temperature Signal Message Counter Incorrect.
Common causes
Common causes include Faulty Reductant Temperature Sensor, Reductant Temperature Sensor harness is open or shorted, Reductant Temperature Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 239
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 26, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P10C8 2014 Chevrolet Silverado Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Reductant Temperature Signal Message Counter is Incorrect.
OBDII Code P10C8 2014 Chevrolet Silverado - Reductant Temperature Signal Message Counter Incorrect - AutoCodes.com
P10C8 2014 Chevrolet Silverado Code - Reductant Temperature Signal Message Counter Incorrect

What are the Possible Causes of the DTC P10C8 2014 Chevrolet Silverado?

  • Faulty Reductant Temperature Sensor
  • Reductant Temperature Sensor harness is open or shorted
  • Reductant Temperature Sensor circuit poor electrical connection

How to Fix the DTC P10C8 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P10C8 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P10C8 2014 Chevrolet Silverado code?

Need more information on how to fix the P10C8 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P10C8 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P10C8 2014 Chevrolet Silverado Code

1. What does the OBDII code P10C8 mean for a 2014 Chevrolet Silverado?

P10C8 indicates an issue with the reductant (DEF) temperature sensor signal, specifically related to an incorrect message counter received by the ECM.

2. What are common symptoms of the P10C8 code?

Symptoms may include the check engine light turning on, reduced engine performance, DEF system warnings, or the vehicle entering a limp mode.

3. What causes the P10C8 code to appear?

Common causes include a faulty reductant temperature sensor, damaged wiring or connectors in the DEF system, or a problem with the ECM communication.

4. How can I diagnose the P10C8 code?

Start by scanning for codes, inspecting the wiring and connectors around the reductant temperature sensor, and testing the sensor’s signal with a multimeter.

5. Can I drive my 2014 Chevrolet Silverado with a P10C8 code?

Driving with this code may lead to reduced performance or limp mode. It’s best to address the issue promptly to avoid further damage.

6. How do I fix the P10C8 code?

Repairs may involve replacing the reductant temperature sensor, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.

7. How much does it cost to fix the P10C8 code?

Repair costs vary but typically range from $100 to $400, depending on whether the sensor, wiring, or ECM requires replacement or repair.

8. Can a bad ECM cause the P10C8 code?

Yes, a malfunctioning ECM may fail to process the reductant temperature signal correctly, triggering the P10C8 code.

9. How can I prevent the P10C8 code from recurring?

Regularly inspect and maintain the DEF system, including sensors, wiring, and connectors, to prevent signal issues.

10. Is the P10C8 code covered under warranty for a 2014 Chevrolet Silverado?

It depends on your warranty terms. DEF system components may be covered under emissions warranties, so check with your dealer.

Discuss the causes and fixes for P10C8 2014 Chevrolet Silverado OBDII Code

Code P10C8 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play