AutoCodes – Buick – P10BF Buick

P10BF Buick Code - Engine Coolant Bypass Valve Secondary Command Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Engine Coolant Bypass Valve, Engine Coolant Bypass Valve harness is open or shorted, Engine Coolant Bypass Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P10BF Buick indicates Engine Coolant Bypass Valve Secondary Command Signal Message Counter Incorrect.
Common causes: Common causes include Faulty Engine Coolant Bypass Valve, Engine Coolant Bypass Valve harness is open or shorted, Engine Coolant Bypass Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 538

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 26, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P10BF Buick Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Engine Coolant Bypass Valve Secondary Command Signal Message Counter is Incorrect.

OBDII Code P10BF Buick - Engine Coolant Bypass Valve Secondary Command Signal Message Counter Incorrect - AutoCodes.com — P10BF Buick Code - Engine Coolant Bypass Valve Secondary Command Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P10BF Buick?

Faulty Engine Coolant Bypass Valve
Engine Coolant Bypass Valve harness is open or shorted
Engine Coolant Bypass Valve circuit poor electrical connection

How to Fix the DTC P10BF Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P10BF Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P10BF Buick code?

Need more information on how to fix the P10BF Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P10BF Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P10BF Buick Code

What does the OBDII code P10BF mean for my Buick?

The code P10BF indicates that there is an issue with the Engine Coolant Bypass Valve Secondary Command Signal, specifically that the message counter is incorrect.

What symptoms might I experience if my Buick has a P10BF code?

Common symptoms include engine overheating, poor heating performance in the cabin, and an illuminated check engine light.

What are the possible causes of the P10BF code?

Possible causes include a faulty engine coolant bypass valve, issues with the vehicleâ€™s wiring or connectors, or problems with the engine control module (ECM).

Can I drive my Buick with a P10BF code?

While it may be possible to drive the vehicle, it's advisable to address the issue promptly to avoid overheating and potential engine damage.

How can I diagnose the P10BF code?

Start by using an OBDII scanner to confirm the code. Then, inspect the engine coolant bypass valve, wiring, and connectors for any signs of damage or corrosion.

What repairs might be needed for the P10BF code?

Repairs may involve replacing the engine coolant bypass valve, repairing or replacing damaged wiring or connectors, or reprogramming the ECM if necessary.

How can I prevent future occurrences of the P10BF code?

Regular vehicle maintenance, including checking and replacing coolant, inspecting electrical connections, and addressing any overheating issues promptly, can help prevent this code from reappearing.

Is it safe to ignore the P10BF code?

Ignoring the P10BF code is not recommended, as it can lead to engine overheating and other serious engine problems.

Will clearing the P10BF code fix the problem?

Clearing the code may turn off the check engine light temporarily, but it does not fix the underlying issue. The code is likely to return if the problem is not addressed.