P10B9 2018 GMC Sierra Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B9 2018 GMC Sierra indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10B9 2018 GMC Sierra Description
What are the Possible Causes of the DTC P10B9 2018 GMC Sierra?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P10B9 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10B9 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10B9 2018 GMC Sierra code?
Need more information on how to fix the P10B9 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B9 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B9 2018 GMC Sierra Code
1. What does the OBDII code P10B9 mean on a 2018 GMC Sierra?
The P10B9 code indicates an issue with the Mass Air Flow (MAF) Sensor and Barometric Pressure Sensor, specifically related to an incorrect signal message counter for Bank 1.
2. What are the symptoms of code P10B9 in a 2018 GMC Sierra?
Common symptoms include reduced engine performance, rough idling, poor fuel economy, and possible illumination of the check engine light.
3. What causes code P10B9 to appear on a 2018 GMC Sierra?
This code can be caused by a malfunctioning MAF sensor, faulty barometric pressure sensor, wiring or connector issues, or a problem with the Engine Control Module (ECM).
4. Can a dirty Mass Air Flow sensor trigger code P10B9?
Yes, a dirty or contaminated MAF sensor can cause inaccurate readings, leading to the P10B9 code.
5. How do you diagnose the P10B9 code on a 2018 GMC Sierra?
Diagnosis includes using a scan tool to monitor sensor data, visually inspecting wiring and connectors, and testing the MAF and barometric pressure sensors for proper functionality.
6. Can you drive a 2018 GMC Sierra with code P10B9 active?
While it may be possible to drive, it is not recommended as the engine may perform poorly, and ignoring the issue could lead to further damage.
7. How is the P10B9 code fixed on a 2018 GMC Sierra?
Repairs may involve cleaning or replacing the MAF sensor, repairing damaged wiring or connectors, replacing the barometric pressure sensor, or reprogramming the ECM if necessary.
8. How much does it cost to fix the P10B9 code on a 2018 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the MAF sensor or barometric pressure sensor needs replacement and labor costs.
9. Can a software update fix the P10B9 code on a 2018 GMC Sierra?
In some cases, a software update or reflash of the ECM can resolve the issue if the problem is related to incorrect calibration or programming.
10. How can I prevent the P10B9 code from returning on my 2018 GMC Sierra?
Regular maintenance, including cleaning the MAF sensor and inspecting wiring and connectors for damage, can help prevent this code from recurring.
Discuss the causes and fixes for P10B9 2018 GMC Sierra OBDII Code
Code P10B9 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
