P10B9 2016 GMC Sierra Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B9 2016 GMC Sierra indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10B9 2016 GMC Sierra Description
What are the Possible Causes of the DTC P10B9 2016 GMC Sierra?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P10B9 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10B9 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10B9 2016 GMC Sierra code?
Need more information on how to fix the P10B9 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B9 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B9 2016 GMC Sierra Code
1. What does the OBDII code P10B9 mean on a 2016 GMC Sierra?
The P10B9 code indicates an issue with the Mass Air Flow (MAF) Sensor and Barometric Pressure Sensor Signal Message Counter being incorrect for Bank 1.
2. What are the common symptoms of code P10B9 on a 2016 GMC Sierra?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, and an illuminated Check Engine Light.
3. What causes the P10B9 code to appear on a 2016 GMC Sierra?
The code can be caused by a faulty MAF sensor, a malfunctioning barometric pressure sensor, wiring issues, or a problem with the engine control module (ECM).
4. Can a dirty air filter cause the P10B9 code?
While a dirty air filter can affect airflow readings, it is unlikely to directly cause P10B9. However, it’s good practice to check and replace the air filter if dirty.
5. How do I diagnose the P10B9 code on my 2016 GMC Sierra?
Diagnosis typically involves scanning for additional codes, inspecting the MAF and barometric pressure sensors, checking wiring and connectors, and testing the ECM.
6. Can I drive my 2016 GMC Sierra with the P10B9 code?
Driving with this code may be possible but is not recommended, as it could lead to poor performance, reduced fuel efficiency, and potential damage to engine components.
7. How do I fix the P10B9 code on a 2016 GMC Sierra?
Repairs may include replacing the MAF sensor, barometric pressure sensor, or repairing damaged wiring. In some cases, reprogramming or replacing the ECM may be necessary.
8. How much does it cost to repair the P10B9 code on a 2016 GMC Sierra?
Repair costs can range from $100 to $400 for sensor replacement, but ECM-related repairs could be more expensive depending on the issue.
9. What tools are needed to troubleshoot the P10B9 code on a 2016 GMC Sierra?
You will need an OBDII scanner, a multimeter for testing electrical connections, and possibly tools to remove and replace the MAF or barometric pressure sensors.
10. Can a software update fix the P10B9 code on a 2016 GMC Sierra?
Yes, if the issue is related to outdated ECM software, a software update from a dealership or qualified technician may resolve the problem.
Discuss the causes and fixes for P10B9 2016 GMC Sierra OBDII Code
Code P10B9 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
