P10B8 Buick Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B8 Buick indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10B8 Buick Description
What are the Possible Causes of the DTC P10B8 Buick?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P10B8 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10B8 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10B8 Buick code?
Need more information on how to fix the P10B8 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B8 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B8 Buick Code
What does the OBDII code P10B8 mean on a Buick?
The P10B8 code indicates an issue with the Mass Air Flow (MAF) sensor or Barometric Pressure (BARO) sensor on Bank 2, specifically related to an incorrect signal message counter.
What are the common symptoms of code P10B8 in a Buick?
Symptoms include a check engine light, poor engine performance, reduced fuel efficiency, rough idling, and possibly hesitation during acceleration.
What causes the P10B8 code to appear?
Common causes include a malfunctioning MAF or BARO sensor, faulty wiring or connectors, calibration errors, or an issue with the vehicle's ECM (Engine Control Module).
Can a dirty MAF sensor cause the P10B8 code on a Buick?
Yes, a dirty or contaminated MAF sensor can cause incorrect readings, leading to the P10B8 code.
How can I diagnose the P10B8 code on my Buick?
Start by inspecting the MAF and BARO sensors, checking for dirt, damage, or loose connections. Use a diagnostic scanner to monitor sensor data and ensure signal consistency.
Is it safe to drive my Buick with the P10B8 code?
Driving with this code may not immediately harm your vehicle, but it can lead to reduced performance and fuel economy. Prolonged driving without repairs could cause further damage.
How can I fix the P10B8 code on my Buick?
Repairs may include cleaning or replacing the MAF or BARO sensors, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.
Does the P10B8 code affect only Bank 2 of the engine?
Yes, this code is specific to Bank 2, which refers to the side of the engine opposite Bank 1 in a V-type engine.
Can a faulty ECM cause the P10B8 code?
Yes, a malfunctioning ECM can misinterpret sensor signals, resulting in the P10B8 code being triggered.
How much does it cost to repair the P10B8 code on a Buick?
Repair costs vary depending on the issue but typically range from $100 to $400 for sensor replacement or wiring repairs. ECM reprogramming or replacement may cost more.
Discuss the causes and fixes for P10B8 Buick OBDII Code
Code P10B8 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
