P10B8 2014 GMC Sierra Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B8 2014 GMC Sierra indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10B8 2014 GMC Sierra Description
What are the Possible Causes of the DTC P10B8 2014 GMC Sierra?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P10B8 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10B8 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10B8 2014 GMC Sierra code?
Need more information on how to fix the P10B8 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B8 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B8 2014 GMC Sierra Code
1. What does the OBDII code P10B8 mean on a 2014 GMC Sierra?
The P10B8 code indicates an issue with the Mass Air Flow (MAF) Sensor or Barometric Pressure Sensor signal message counter being incorrect on Bank 2.
2. What are the symptoms of the P10B8 code on a 2014 GMC Sierra?
Common symptoms include reduced engine performance, poor fuel efficiency, rough idling, and possibly the Check Engine Light being illuminated.
3. What causes the P10B8 code to appear?
Possible causes include a faulty Mass Air Flow Sensor, a malfunctioning Barometric Pressure Sensor, wiring or connector issues, or a problem with the engine control module (ECM).
4. How is the P10B8 code diagnosed?
A mechanic will use an OBDII scanner to confirm the code, inspect the MAF and Barometric Pressure Sensors, check wiring and connectors, and perform tests to verify sensor outputs.
5. Can a dirty air filter cause the P10B8 code?
While not a direct cause, a dirty air filter can restrict airflow, which may contribute to sensor inaccuracies or engine performance issues.
6. How do you fix the P10B8 code on a 2014 GMC Sierra?
Repairs may include cleaning or replacing the MAF Sensor, replacing the Barometric Pressure Sensor, repairing damaged wiring, or reprogramming or replacing the ECM if needed.
7. Can you drive with the P10B8 code present?
While the vehicle may still be drivable, it’s not recommended as it could lead to reduced performance, poor fuel economy, and potential damage to engine components.
8. How much does it cost to fix the P10B8 code?
Costs vary depending on the issue but typically range from $100 to $400 for sensor replacement and labor. ECM repairs or replacements could be more expensive.
9. What tools are needed to troubleshoot the P10B8 code?
Basic tools include an OBDII scanner, a multimeter for testing electrical connections, and possibly tools to access and clean the MAF Sensor.
10. Does the P10B8 code require reprogramming the ECM?
In some cases, reprogramming the ECM may be necessary if the issue is related to software or calibration errors.
Discuss the causes and fixes for P10B8 2014 GMC Sierra OBDII Code
Code P10B8 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
