P10B7 2018 Chevrolet Silverado Code - Mass Air Flow Sensor Intake Air Signals Message Counter Incorrect Bank 2
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B7 2018 Chevrolet Silverado indicates Mass Air Flow Sensor Intake Air Signals Message Counter Incorrect Bank 2.
- Common causes
- Common causes include Faulty Mass Air Flow Sensor, Mass Air Flow Sensor harness is open or shorted, Mass Air Flow Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10B7 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC P10B7 2018 Chevrolet Silverado?
- Faulty Mass Air Flow Sensor
- Mass Air Flow Sensor harness is open or shorted
- Mass Air Flow Sensor circuit poor electrical connection
How to Fix the DTC P10B7 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10B7 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10B7 2018 Chevrolet Silverado code?
Need more information on how to fix the P10B7 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B7 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B7 2018 Chevrolet Silverado Code
1. What does the OBDII code P10B7 mean on a 2018 Chevrolet Silverado?
The P10B7 code indicates an issue with the Mass Air Flow (MAF) sensor where the intake air signals message counter is incorrect for Bank 2.
2. What are the common symptoms of the P10B7 code in a 2018 Chevrolet Silverado?
Symptoms may include reduced engine performance, rough idling, decreased fuel efficiency, and an illuminated Check Engine Light.
3. What causes the P10B7 code to appear on a 2018 Chevrolet Silverado?
Common causes include a faulty MAF sensor, wiring or connector issues, a software glitch in the engine control module (ECM), or air intake leaks.
4. How do you diagnose the P10B7 code on a 2018 Chevrolet Silverado?
Diagnosis involves scanning for codes, inspecting the MAF sensor and its wiring, checking for air intake leaks, and verifying the ECM software version.
5. Can a dirty air filter cause the P10B7 code?
Yes, a clogged or dirty air filter can restrict airflow, potentially contributing to MAF sensor issues and triggering the code.
6. How do you fix the P10B7 code on a 2018 Chevrolet Silverado?
Repairs may include cleaning or replacing the MAF sensor, repairing damaged wiring, addressing air intake leaks, or updating the ECM software.
7. Is it safe to drive with the P10B7 code on a 2018 Chevrolet Silverado?
While it may be possible to drive, the code can affect engine performance and fuel economy, so timely diagnosis and repair are recommended.
8. Can a faulty Bank 2 MAF sensor cause misfires in a 2018 Chevrolet Silverado?
Yes, a malfunctioning Bank 2 MAF sensor can disrupt the air-fuel mixture, potentially leading to engine misfires.
9. How much does it typically cost to repair the P10B7 code on a 2018 Chevrolet Silverado?
Repair costs vary, but replacing a MAF sensor typically ranges from $200 to $400, while other repairs like fixing wiring or leaks may cost less.
10. Do I need to reprogram the ECM after fixing the P10B7 code on a 2018 Chevrolet Silverado?
Reprogramming the ECM is not always necessary, but clearing the code and performing a system reset may be required after repairs.
Discuss the causes and fixes for P10B7 2018 Chevrolet Silverado OBDII Code
Code P10B7 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
