AutoCodes – Generic – P1092

P1092 Code - VVEL Control Shaft Position Sensor Bank 2 Circuit

Quick Answer

VVEL (Variable Valve Event & Lift) is a system that controls valve event and valve lift continuously. Common causes include Faulty VVEL Control Shaft Position Sensor Bank 2, VVEL Control Shaft Position Sensor Bank 2 harness is open or shorted, VVEL Control Shaft Position Sensor Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1092 indicates VVEL Control Shaft Position Sensor Bank 2 Circuit.
Common causes: Common causes include Faulty VVEL Control Shaft Position Sensor Bank 2, VVEL Control Shaft Position Sensor Bank 2 harness is open or shorted, VVEL Control Shaft Position Sensor Bank 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,501

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 08, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1092 Description

VVEL (Variable Valve Event & Lift) is a system that controls valve event and valve lift continuously. Rotational movement of the drive shaft equipped with eccentric cam is transmitted to output cam via the rocker arm and two kinds of links to depress the intake valve. The Engine Control Module (ECM) decides the target valve lift according to the driving condition and sends the command signal to the VVEL control module. The VVEL control module controls the rotation of the control shaft using the VVEL actuator motor and changes the movement of the output cam by shifting the link supporting point. As a result, valve lift changes continuously to improve engine output and response.
VVEL control shaft position sensor (1) is placed on VVEL actuator sub assembly and detects the control shaft position angle. A magnet is pressed into the arm on the edge of control shaft.
The magnetic field changes as the magnet rotates together with the arm resulting in the output voltage change of the sensor. VVEL control module detects the actual position angle through the voltage change and sends the signal to ECM.

OBDII Code P1092 - VVEL Control Shaft Position Sensor Bank 2 Circuit - AutoCodes.com — P1092 Code - VVEL Control Shaft Position Sensor Bank 2 Circuit

What does this mean?

What are the Possible Causes of the DTC P1092?

Faulty VVEL Control Shaft Position Sensor Bank 2
VVEL Control Shaft Position Sensor Bank 2 harness is open or shorted
VVEL Control Shaft Position Sensor Bank 2 circuit poor electrical connection
Faulty VVEL control module

How to Fix the DTC P1092?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1092 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1092 code?

Need more information on how to fix the P1092 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1092 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1092 BMW — Pre-Catalyst Fuel Trim Too Lean Bank 2
P1092 Infiniti — VVEL Control Shaft Position Sensor Bank 2 Circuit
P1092 MINI — Pre-Catalyst Fuel Trim Too Lean Bank 2
P1092 Nissan — VVEL Control Shaft Position Sensor Bank 2 Circuit
P1092 Porsche — Hot Film Mass Air Flow Sensor Under Limit Value
P1092 Subaru — Tumble Generated Valve System 2 Valve Open

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1092 Code

1. What are the common symptoms of OBDII code P1092 (VVEL Control Shaft Position Sensor Bank 2 Circuit)?

- Common symptoms include rough idle, engine misfires, decreased fuel efficiency, and potential stalling.

2. What are the possible causes of OBDII code P1092?

- Possible causes include a faulty VVEL control shaft position sensor, wiring issues, poor electrical connection, or a problem with the VVEL system itself.

3. How can I diagnose the VVEL control shaft position sensor for OBDII code P1092?

- Use a multimeter to test the sensor's resistance and voltage output. Inspect the wiring and connectors for any signs of damage or corrosion.

4. Can a dirty throttle body cause OBDII code P1092?

- Yes, a dirty throttle body can disrupt the VVEL system's operation and potentially trigger code P1092. Regular maintenance of the throttle body is recommended.

5. What is the recommended repair for OBDII code P1092?

- The recommended repair is to replace the faulty VVEL control shaft position sensor, address any wiring issues, and ensure proper connections are made.

6. Are there any DIY tips for addressing OBDII code P1092?

- While diagnosing and repairing this code may require some technical knowledge, checking for loose connections and ensuring proper sensor installation are good starting points for DIY enthusiasts.

7. Can driving with OBDII code P1092 cause further damage to the vehicle?

- Continuing to drive with this code unresolved can potentially lead to engine performance issues and further damage to the VVEL system. It is recommended to address the issue promptly.

8. How much does it typically cost to repair OBDII code P1092 at a mechanic?

- The cost of repairing this code can vary depending on the labor rates and parts needed. On average, the repair cost can range from $200 to $500.

9. Is it safe to reset the OBDII code P1092 without fixing the underlying issue?

- Resetting the code without addressing the underlying problem will only temporarily clear the Check Engine Light. It is important to investigate and repair the root cause to prevent further issues.

10. Can a dealership service center help diagnose and repair OBDII code P1092?

- Yes, dealership service centers have specialized equipment and trained technicians who can accurately diagnose and repair OBDII code P1092 related to the VVEL system.