P1089 - VVEL Control Shaft Position Sensor Bank 1 Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

P1089 Possible Causes

  • Faulty VVEL Control Shaft Position Sensor Bank 1
  • VVEL Control Shaft Position Sensor Bank 1 harness is open or shorted
  • VVEL Control Shaft Position Sensor Bank 1 circuit poor electrical connection
  • Faulty VVEL control module

First diagnose P1089 code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1089 code

    Labor: 1.0

    The cost of diagnosing the P1089 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

P1089 Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1089 Description

VVEL (Variable Valve Event & Lift) is a system that controls valve event and valve lift continuously. Rotational movement of the drive shaft equipped with eccentric cam is transmitted to output cam via the rocker arm and two kinds of links to depress the intake valve. The Engine Control Module (ECM) decides the target valve lift according to the driving condition and sends the command signal to the VVEL control module. The VVEL control module controls the rotation of the control shaft using the VVEL actuator motor and changes the movement of the output cam by shifting the link supporting point. As a result, valve lift changes continuously to improve engine output and response.
VVEL control shaft position sensor (1) is placed on VVEL actuator sub assembly and detects the control shaft position angle. A magnet is pressed into the arm on the edge of control shaft.
The magnetic field changes as the magnet rotates together with the arm resulting in the output voltage change of the sensor. VVEL control module detects the actual position angle through the voltage change and sends the signal to ECM.
OBDII Code P1089 - VVEL Control Shaft Position Sensor Bank 1 Circuit - AutoCodes.com

P1089 More Information

Need more information on how to fix the P1089 code?
Get Access to Factory Service Manuals

P1089 Information for specific makes

  • P1089 INFINITI VVEL Control Shaft Position Sensor Bank 1 Circuit
  • P1089 NISSAN VVEL Control Shaft Position Sensor Bank 1 Circuit
  • P1089 SUBARU Tumble Generator Valve #1 Position Sensor Circuit High Input

Need more help?

Get the P1089 code diagnosed by a professional: Find a repair shop in your area

Related Information

P1089 Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1089 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧