AutoCodes – Fiat – P1067 Fiat

P1067 Fiat Code - Cylinder 2 Oil Supply Solenoid Valve Switch ON Time Out Of Range

Quick Answer

Multi-Air is an electronically controlled variable intake valve phase and lift system. Common causes include Engine oil level low, Engine oil contaminated, Incorrect oil filter. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1067 Fiat indicates Cylinder 2 Oil Supply Solenoid Valve Switch ON Time Out Of Range.
Common causes: Common causes include Engine oil level low, Engine oil contaminated, Incorrect oil filter.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,629

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1067 Fiat Description

Multi-Air is an electronically controlled variable intake valve phase and lift system. Unlike conventional intake valve phase and lift system which controls all the cylinder intake valves simultaneously and in the same proportion; Multi-Air, through the use of an electronically controlled hydraulic link between the camshaft and intake valve, allows for each intake valve to be controlled independently. The valve lift and timing can be adjusted infinitely.
The Multi-Air valve train has a mechanical camshaft lobe acting on a hydraulic pump located between the camshaft intake lobe and the intake valve. The pump provides oil under pressure to a two-way electro-hydraulic solenoid valve called the Variable Valve Actuator (VVA) Solenoid. The VVA Solenoid is electronically controlled during the specific intake cam lobe event by the Powertrain Control Module (PCM). During the event, the VVA Solenoid is commanded to either hold oil pressure or bleed oil. The VVA Solenoid is a normally open solenoid. The PCM provides 12 volts to close the solenoid. The position of the VVA Solenoid determines the intake valve timing and lift. This change on valve action is similar to creating a change in the camshaft lobe profile affecting the lift and duration of the valve opening.
The Diagnostic Trouble Code (DTC) will be set when the PCM measures the time needed to turn on the VVA Solenoid. When the PCM recognizes that the VVA Solenoids switch on time is too fast or too slow a fault is set.

OBDII Code P1067 Fiat - Cylinder 2 Oil Supply Solenoid Valve Switch ON Time Out Of Range - AutoCodes.com — P1067 Fiat Code - Cylinder 2 Oil Supply Solenoid Valve Switch ON Time Out Of Range

What does this mean?

What are the Possible Causes of the DTC P1067 Fiat?

Engine oil level low
Engine oil contaminated
Incorrect oil filter
Insufficient oil pressure due to a mechanical failure in the oiling system
Faulty Variable Valve Actuator (VVA) Assembly

How to Fix the DTC P1067 Fiat?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1067 Fiat code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1067 Fiat code?

Need more information on how to fix the P1067 Fiat code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1067 Fiat code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1067 Fiat Code

1. What are the common symptoms of OBDII code P1067 in a Fiat?

- Common symptoms include rough engine idling, reduced engine performance, and potential stalling.

2. What does the OBDII code P1067 in a Fiat indicate?

- OBDII code P1067 indicates that the Cylinder 2 Oil Supply Solenoid Valve Switch ON Time is out of range.

3. What are the possible causes of OBDII code P1067 in a Fiat?

- Possible causes include a faulty oil supply solenoid valve, wiring issues, poor electrical connection, or a malfunctioning PCM.

4. How serious is OBDII code P1067 in a Fiat?

- OBDII code P1067 should be addressed promptly to prevent potential engine damage and ensure optimal vehicle performance.

5. Can OBDII code P1067 in a Fiat be fixed without professional help?

- While some DIY enthusiasts may attempt to diagnose and fix the issue, it is recommended to seek professional help for accurate diagnosis and repair.

6. How can I diagnose OBDII code P1067 in my Fiat?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the oil supply solenoid valve, and checking the wiring and connections.

7. Is it safe to drive with OBDII code P1067 present in a Fiat?

- It is not recommended to drive with OBDII code P1067 present, as it can lead to engine performance issues and potential breakdowns.

8. How much does it cost to repair OBDII code P1067 in a Fiat?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the oil supply solenoid valve or addressing wiring problems.

9. Are there any preventive maintenance tips to avoid OBDII code P1067 in a Fiat?

- Regular vehicle maintenance, such as oil changes and inspections, can help prevent issues that may trigger OBDII code P1067.

10. Can resetting the OBDII system clear OBDII code P1067 in a Fiat?

- Resetting the OBDII system may temporarily clear the code, but it is important to diagnose and address the underlying issue to prevent its recurrence.