AutoCodes – Volvo – P1041 Volvo

P1041 Volvo Code - Brake Pedal Sensor

Quick Answer

The Engine Control Module (ECM) monitors the Brake Pedal Sensor. Common causes include Faulty Brake Pedal Sensor, Brake Pedal Sensor harness is open or shorted, Brake Pedal Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1041 Volvo indicates Brake Pedal Sensor.
Common causes: Common causes include Faulty Brake Pedal Sensor, Brake Pedal Sensor harness is open or shorted, Brake Pedal Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,942

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 19, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1041 Volvo Description

The Engine Control Module (ECM) monitors the Brake Pedal Sensor. The ECM sets the Diagnostic Trouble Code (DTC) when the Brake Pedal Sensor is not to factory specifications.

OBDII Code P1041 Volvo - Brake Pedal Sensor - AutoCodes.com — P1041 Volvo Code - Brake Pedal Sensor

What does this mean?

What are the Possible Causes of the DTC P1041 Volvo?

Faulty Brake Pedal Sensor
Brake Pedal Sensor harness is open or shorted
Brake Pedal Sensor circuit poor electrical connection

How to Fix the DTC P1041 Volvo?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1041 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1041 Volvo code?

Need more information on how to fix the P1041 Volvo code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1041 Volvo code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1041 Volvo Code

1. What are the common symptoms of OBDII code P1041 in a Volvo related to the Brake Pedal Sensor?

The common symptoms include issues with cruise control operation, ABS warning lights on the dashboard, and potential difficulties when shifting gears.

2. What are the possible causes of OBDII code P1041 in a Volvo related to the Brake Pedal Sensor?

The code P1041 in a Volvo is typically triggered by a faulty brake pedal sensor, damaged wiring or connectors, or a malfunctioning brake control module.

3. How can I diagnose the cause of OBDII code P1041 in my Volvo related to the Brake Pedal Sensor?

To diagnose the issue, it is recommended to perform a thorough inspection of the brake pedal sensor, check the wiring and connectors for any damage, and use an OBDII scanner to identify the specific cause.

4. Can I continue driving my Volvo with OBDII code P1041 related to the Brake Pedal Sensor?

It is not recommended to continue driving your Volvo with OBDII code P1041 related to the Brake Pedal Sensor, as it can lead to potential safety hazards and affect the overall performance of your vehicle.

5. How can I repair OBDII code P1041 in my Volvo related to the Brake Pedal Sensor?

Repairing OBDII code P1041 typically involves replacing the faulty brake pedal sensor, repairing or replacing damaged wiring or connectors, and resetting the OBDII system to clear the code.

6. Are there any DIY tips for troubleshooting OBDII code P1041 in a Volvo related to the Brake Pedal Sensor?

While some basic inspections and checks can be done by DIY enthusiasts, it is recommended to consult a professional mechanic for a thorough diagnosis and repair of OBDII code P1041 related to the Brake Pedal Sensor.

7. How much does it cost to fix OBDII code P1041 in a Volvo related to the Brake Pedal Sensor?

The cost of fixing OBDII code P1041 in a Volvo can vary depending on the specific issue, parts needed for replacement, and labor costs. It is advisable to get a detailed quote from a trusted mechanic.

8. Can a faulty Brake Pedal Sensor cause other issues in my Volvo besides triggering OBDII code P1041?

Yes, a faulty Brake Pedal Sensor can potentially cause other issues such as inconsistent brake performance, problems with the ABS system, and difficulties with electronic stability control.

9. How long does it typically take to repair OBDII code P1041 in a Volvo related to the Brake Pedal Sensor?

The repair time for OBDII code P1041 in a Volvo can vary depending on the extent of the issue and the availability of parts. In general, it may take a few hours to a day for a skilled mechanic to diagnose and fix the problem.

10. Can I prevent OBDII code P1041 related to the Brake Pedal Sensor in my Volvo?

Regular maintenance, periodic inspections of the brake system, and prompt attention to any warning lights related to the ABS or brake system can help prevent OBDII code P1041 related to the Brake Pedal Sensor in your Volvo.