AutoCodes – GMC – P103D 2014 GMC Sierra

P103D 2014 GMC Sierra Code - Engine Coolant Pump Control Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Engine Coolant Pump Control Module, Engine Coolant Pump Control Module harness is open or shorted, Engine Coolant Pump Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P103D 2014 GMC Sierra indicates Engine Coolant Pump Control Signal Message Counter Incorrect.
Common causes: Common causes include Faulty Engine Coolant Pump Control Module, Engine Coolant Pump Control Module harness is open or shorted, Engine Coolant Pump Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 159

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 19, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P103D 2014 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Engine Coolant Pump Control Signal Message Counter is Incorrect.

OBDII Code P103D 2014 GMC Sierra - Engine Coolant Pump Control Signal Message Counter Incorrect - AutoCodes.com — P103D 2014 GMC Sierra Code - Engine Coolant Pump Control Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P103D 2014 GMC Sierra?

Faulty Engine Coolant Pump Control Module
Engine Coolant Pump Control Module harness is open or shorted
Engine Coolant Pump Control Module circuit poor electrical connection

How to Fix the DTC P103D 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P103D 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P103D 2014 GMC Sierra code?

Need more information on how to fix the P103D 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P103D 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.