P1032 NISSAN - Air Fuel Ratio Sensor 1 Heater Control Circuit High Bank 1
P1032 NISSAN Possible Causes
- Faulty Air Fuel Ratio Sensor 1 Bank 1
- Air Fuel Ratio Sensor 1 harness is open or shorted
- Air Fuel Ratio Sensor 1 circuit poor electrical connection
First diagnose P1032 NISSAN code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1032 NISSAN code
Labor: 1.0The cost of diagnosing the P1032 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1032 NISSAN code detected?The current amperage in the heated air fuel ratio (A/F) sensor 1 heater circuit is out of the normal range. An excessively high voltage signal is sent to Engine Control Module (ECM) through the heated air fuel ratio (A/F) sensor 1 heater.
P1032 NISSAN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1032 Nissan DescriptionThe Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F) sensor 1 heater corresponding to the engine operating condition to keep the temperature of A/F sensor 1 element at the specified range.
P1032 NISSAN More InformationNeed more information on how to fix the P1032 NISSAN code?
Get Access to Factory Service Manuals
P1032 Nissan Information for specific Nissan models
Need more help?Get the P1032 Nissan code diagnosed by a professional: Find a repair shop in your area
P1032 NISSAN CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1032 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks