P101F Code - Glow Plug Control Module Temperature Sensor 1 Not Plausible
Quick Answer
The Glow Plug Control Module has the ability to perform internal temperature diagnostics for the microprocessor and the glow plug drivers. Common causes include Faulty Glow Plug Control Module, Glow Plug Control Module harness is open or shorted, Glow Plug Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P101F indicates Glow Plug Control Module Temperature Sensor 1 Not Plausible.
- Common causes
- Common causes include Faulty Glow Plug Control Module, Glow Plug Control Module harness is open or shorted, Glow Plug Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P101F Description
What are the Possible Causes of the DTC P101F?
- Faulty Glow Plug Control Module
- Glow Plug Control Module harness is open or shorted
- Glow Plug Control Module circuit poor electrical connection
How to Fix the DTC P101F?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P101F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P101F code?
Need more information on how to fix the P101F code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P101F code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P101F Buick — Glow Plug Control Module Temperature Sensor 1 Not Plausible
- P101F Cadillac — Glow Plug Control Module Temperature Sensor 1 Not Plausible
- P101F Chevrolet — Glow Plug Control Module Temperature Sensor 1 Not Plausible
- P101F GMC — Glow Plug Control Module Temperature Sensor 1 Not Plausible
Frequently Asked Questions about P101F Code
1. What are the common symptoms of OBDII code P101F (Glow Plug Control Module Temperature Sensor 1 Not Plausible)?
The common symptoms include rough idling, reduced engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of OBDII code P101F?
Possible causes may include a faulty glow plug control module temperature sensor, wiring issues, a malfunctioning control module, or a software problem in the engine control unit (ECU).
3. How can I diagnose the reason behind OBDII code P101F?
Diagnosis typically involves using an OBDII scanner to retrieve the code and then conducting a thorough inspection of the glow plug control module temperature sensor, related wiring, and the control module itself for any signs of damage or malfunction.
4. Can I still drive my vehicle with code P101F present?
It is not recommended to drive your vehicle with this code present, as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
5. How can I repair OBDII code P101F?
Repair options may include replacing the faulty temperature sensor, repairing any damaged wiring, resetting the control module, or updating the ECU software. It's advisable to consult a professional mechanic for accurate diagnosis and repair.
6. Is it safe to ignore OBDII code P101F?
Ignoring this code can lead to more severe engine problems over time, potentially reducing the lifespan of your vehicle and increasing repair costs. It's best to address the issue promptly to prevent further complications.
7. Can a DIY enthusiast fix OBDII code P101F at home?
Depending on your level of automotive knowledge and access to tools, you may be able to address this code at home. However, due to the complexity of modern vehicle systems, it's recommended to seek professional help to ensure a proper diagnosis and repair.
8. How much does it typically cost to repair OBDII code P101F?
The cost of repairing this code can vary depending on the specific cause of the issue, parts needed for replacement, labor costs, and location. It's advisable to obtain quotes from different mechanics or repair shops for a more accurate estimate.
9. Are there any preventive measures to avoid OBDII code P101F in the future?
Regular maintenance, including checking the glow plug system, monitoring sensor performance, and addressing any warning signs promptly, can help prevent the recurrence of this code. Following the manufacturer's recommended service schedule is also crucial.
10. Can extreme weather conditions affect OBDII code P101F?
Extreme temperatures, especially cold weather, can impact the performance of glow plugs and related components, potentially leading to issues like code P101F. Ensuring your vehicle is properly maintained and protected during extreme weather can help prevent such problems.
Discuss the causes and fixes for P101F OBDII Code
Code P101F comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
