P101B Code - Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage
Quick Answer
The Glow Plug Control Module (GPCM) has the ability to perform internal diagnostics for the temperature sensor circuit. Common causes include Faulty Glow Plug Control Module (GPCM), Glow Plug Control Module harness is open or shorted, Glow Plug Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P101B indicates Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Glow Plug Control Module (GPCM), Glow Plug Control Module harness is open or shorted, Glow Plug Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P101B Description
What are the Possible Causes of the DTC P101B?
- Faulty Glow Plug Control Module (GPCM)
- Glow Plug Control Module harness is open or shorted
- Glow Plug Control Module circuit poor electrical connection
How to Fix the DTC P101B?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P101B code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P101B code?
Need more information on how to fix the P101B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P101B code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P101B Buick — Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage
- P101B Cadillac — Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage
- P101B Chevrolet — Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage
- P101B GMC — Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage
Frequently Asked Questions about P101B Code
1. What are the common symptoms of OBDII code P101B (Glow Plug Control Module Temperature Sensor 2 Circuit Low Voltage)?
The common symptoms of code P101B may include hard starting, rough idling, reduced engine performance, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P101B?
The possible causes of code P101B can include a faulty glow plug control module, a defective temperature sensor, damaged wiring or connectors, or an issue with the vehicle's electrical system.
3. How can I diagnose OBDII code P101B?
Diagnosing code P101B typically involves using a diagnostic scanner to retrieve the code, checking the glow plug control module and temperature sensor for faults, inspecting wiring and connectors for damage, and testing the electrical system for proper voltage and continuity.
4. Can I still drive my vehicle with OBDII code P101B present?
It is not recommended to drive your vehicle with code P101B present, as it can lead to poor engine performance and potential damage if left unresolved. It is best to address the issue promptly.
5. How can I repair OBDII code P101B?
Repairing code P101B may involve replacing the glow plug control module, replacing the temperature sensor, repairing damaged wiring or connectors, or addressing any underlying electrical issues causing the low voltage condition.
6. Will clearing the OBDII code P101B turn off the Check Engine Light?
Clearing the code may temporarily turn off the Check Engine Light, but if the underlying issue causing code P101B is not addressed, the light is likely to come back on once the problem is detected again by the vehicle's onboard diagnostics.
7. Is it safe to continue driving if the Check Engine Light is flashing due to OBDII code P101B?
If the Check Engine Light is flashing, it indicates a severe issue that requires immediate attention. It is not safe to continue driving in this condition, as it can lead to further damage to the vehicle. Pull over and have the vehicle towed to a repair facility.
8. Can a DIY enthusiast repair OBDII code P101B at home?
While some aspects of diagnosing and repairing code P101B may be within reach of a DIY enthusiast, dealing with electrical components and sensors may require specialized tools and knowledge. It is recommended to consult a professional mechanic for proper diagnosis and repair.
9. How much does it typically cost to repair OBDII code P101B?
The cost of repairing code P101B can vary depending on the underlying cause, the parts needed for repair, and labor costs. It is advisable to get a diagnosis from a mechanic to determine the exact cost of repairs for your specific situation.
10. Can OBDII code P101B cause damage to other engine components if not addressed promptly?
If left unresolved, code P101B can lead to decreased engine performance, increased fuel consumption, and potentially cause damage to other engine components over time. It is important to address the issue promptly to prevent further damage.
Discuss the causes and fixes for P101B OBDII Code
Code P101B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
