P1014 BMW Code - Valvetronic Reference Eccentric Shaft Sensor Parity Error
Quick Answer
The Valvetronic System is a variable valve lift system that, in combination with variable valve timing, allows infinite adjustment of the intake valve timing and duration. Common causes include Reluctor on Valvetronic Eccentric Shaft Sensor poor installation, Faulty Valvetronic Eccentric Shaft Sensor, Valvetronic Eccentric Shaft Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1014 BMW indicates Valvetronic Reference Eccentric Shaft Sensor Parity Error.
- Common causes
- Common causes include Reluctor on Valvetronic Eccentric Shaft Sensor poor installation, Faulty Valvetronic Eccentric Shaft Sensor, Valvetronic Eccentric Shaft Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1014 BMW Description
What are the Possible Causes of the DTC P1014 BMW?
- Reluctor on Valvetronic Eccentric Shaft Sensor poor installation
- Faulty Valvetronic Eccentric Shaft Sensor
- Valvetronic Eccentric Shaft Sensor harness is open or shorted
- Valvetronic Eccentric Shaft Sensor circuit poor electrical connection
How to Fix the DTC P1014 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1014 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1014 BMW code?
Need more information on how to fix the P1014 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1014 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1014 BMW Code
1. What is OBDII code P1014 on a BMW?
The P1014 code on a BMW refers to a "Valvetronic Reference Eccentric Shaft Sensor Parity Error," indicating a fault in the sensor's signal consistency used to adjust valve lift.
2. What are the common symptoms of error code P1014 in BMW?
Symptoms may include rough idling, poor engine performance, reduced fuel efficiency, and in some cases, the engine might enter a fail-safe mode to prevent damage, displayed through a check engine light.
3. What causes the P1014 error code to appear on my BMW?
Common causes include a faulty eccentric shaft sensor, wiring issues like shorts or disconnections, or mechanical problems within the Valvetronic system itself.
4. How can I diagnose the P1014 error code on my BMW?
Diagnosis typically involves using an OBDII scanner to confirm the code, visually inspecting the eccentric shaft sensor and associated wiring, and checking the operation of the Valvetronic system using specialized diagnostic tools.
5. What steps are involved in repairing the P1014 error code on a BMW?
Repair steps may include replacing the eccentric shaft sensor, repairing any faulty wiring, or addressing any mechanical issues in the Valvetronic system. Resetting the engine's computer system after repairs is also crucial to clear the code and retest the system.
6. Is it safe to drive a BMW with the P1014 code?
While it might be possible to drive, it is not advisable as the engine may not run efficiently, and prolonged driving could lead to further damage. It's best to address the issue as soon as possible.
7. Can I fix the P1014 BMW code myself or should I take it to a mechanic?
Depending on your technical skill and availability of the required diagnostic tools, you might be able to address simple wiring issues yourself. However, replacing the eccentric shaft sensor or performing intricate repairs to the Valvetronic system typically requires professional skills and tools.
8. How urgent is it to fix a BMW showing the P1014 code?
It is relatively urgent to fix this issue to prevent potential engine damage and to restore optimal engine performance and fuel efficiency. It is recommended to handle the repairs soon after the code appears.
Discuss the causes and fixes for P1014 BMW OBDII Code
Code P1014 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.