P100E 2016 Chevrolet Silverado Code - Accelerator Pedal Position Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P100E 2016 Chevrolet Silverado indicates Accelerator Pedal Position Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P100E 2016 Chevrolet Silverado Description
What are the Possible Causes of the DTC P100E 2016 Chevrolet Silverado?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P100E 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P100E 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P100E 2016 Chevrolet Silverado code?
Need more information on how to fix the P100E 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P100E 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P100E 2016 Chevrolet Silverado Code
1. What does the OBDII code P100E mean on a 2016 Chevrolet Silverado?
The P100E code indicates an issue with the Accelerator Pedal Position Signal Message Counter, meaning the signal from the accelerator pedal sensor is not being transmitted or interpreted correctly.
2. What are common symptoms of the P100E code in a 2016 Chevrolet Silverado?
Common symptoms include reduced engine performance, limited throttle response, the vehicle entering limp mode, and the check engine light being illuminated.
3. What causes the P100E code in a 2016 Chevrolet Silverado?
The code is typically caused by a faulty accelerator pedal position sensor, damaged wiring or connectors, or an issue with the powertrain control module (PCM).
4. Can I drive my 2016 Chevrolet Silverado with the P100E code?
While you may be able to drive the vehicle, it could experience reduced performance or enter limp mode. It’s best to address the issue promptly to avoid further problems.
5. How do you diagnose the P100E code on a 2016 Chevrolet Silverado?
Diagnosis involves scanning the vehicle with an OBDII tool, inspecting the accelerator pedal position sensor, checking the wiring and connectors, and verifying the data from the sensor.
6. How do you fix the P100E code on a 2016 Chevrolet Silverado?
Repairs may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the PCM if necessary.
7. Is the accelerator pedal position sensor the only part that can cause the P100E code?
No, the code can also be caused by faulty wiring, poor electrical connections, or issues with the PCM.
8. How much does it cost to repair the P100E code on a 2016 Chevrolet Silverado?
Repair costs vary but typically range from $150 to $350 for parts and labor, depending on whether the sensor, wiring, or PCM needs repair or replacement.
9. Can a dirty throttle body cause the P100E code in a 2016 Chevrolet Silverado?
A dirty throttle body is unlikely to cause this specific code, as it relates to the accelerator pedal position signal rather than the throttle body itself.
10. Can resetting the check engine light fix the P100E code?
Resetting the check engine light may temporarily clear the code, but if the underlying issue is not resolved, the code will likely return.
Discuss the causes and fixes for P100E 2016 Chevrolet Silverado OBDII Code
Code P100E 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
