P100E Code - Accelerator Pedal Position Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P100E indicates Accelerator Pedal Position Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P100E Description
What are the Possible Causes of the DTC P100E?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P100E?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P100E code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P100E code?
Need more information on how to fix the P100E code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P100E code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P100E Buick — Accelerator Pedal Position Signal Message Counter Incorrect
- P100E Cadillac — Accelerator Pedal Position Signal Message Counter Incorrect
- P100E Chevrolet — Accelerator Pedal Position Signal Message Counter Incorrect
- P100E GMC — Accelerator Pedal Position Signal Message Counter Incorrect
Frequently Asked Questions about P100E Code
1. What are the common symptoms of OBDII code P100E (Accelerator Pedal Position Signal Message Counter Incorrect)?
The common symptoms of code P100E may include reduced engine performance, poor acceleration, and the illumination of the Check Engine Light.
2. What can cause the OBDII code P100E to be triggered?
The code P100E is typically triggered by a faulty accelerator pedal position sensor, damaged wiring or connectors in the pedal position sensor circuit, or a communication error between the sensor and the engine control module.
3. How can I diagnose the OBDII code P100E?
Diagnosing code P100E usually involves using a diagnostic scanner to read the code, checking the accelerator pedal position sensor for proper operation, inspecting the wiring and connectors for damage, and ensuring there are no communication issues between the sensor and the engine control module.
4. Can I continue driving my vehicle with the OBDII code P100E present?
It is not recommended to continue driving your vehicle with the code P100E present, as it can lead to further engine performance issues and potential safety concerns. It is best to address the issue promptly.
5. What is the typical repair for OBDII code P100E?
The typical repair for code P100E involves replacing the faulty accelerator pedal position sensor, repairing any damaged wiring or connectors, and clearing the code from the engine control module.
6. Are there any DIY tips for fixing the OBDII code P100E?
While it is possible to replace the accelerator pedal position sensor yourself, it is recommended to have the repair done by a qualified mechanic to ensure proper diagnosis and repair of the underlying issue.
7. How much does it cost to fix the OBDII code P100E?
The cost of fixing code P100E can vary depending on the extent of the issue and the labor rates in your area. Typically, the cost of parts and labor for replacing the accelerator pedal position sensor ranges from $150 to $300.
8. Will resetting the Check Engine Light resolve the OBDII code P100E?
Simply resetting the Check Engine Light will not fix the underlying issue causing code P100E. It is important to diagnose the problem, make the necessary repairs, and clear the code from the engine control module to resolve the issue.
9. How soon should I address the OBDII code P100E once it appears?
It is recommended to address the OBDII code P100E as soon as possible to prevent further engine performance issues and potential safety concerns while driving.
10. Can a malfunctioning accelerator pedal position sensor cause other problems in the vehicle?
Yes, a malfunctioning accelerator pedal position sensor can cause other issues such as poor fuel efficiency, rough idling, and difficulty starting the engine. It is important to address the problem promptly to avoid further complications.
Discuss the causes and fixes for P100E OBDII Code
Code P100E comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
