AutoCodesGMC – P100A 2015 GMC Sierra

P100A 2015 GMC Sierra Code - Turbocharger Boost Control Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Turbocharger Boost Control. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P100A 2015 GMC Sierra indicates Turbocharger Boost Control Signal Message Counter Incorrect.
Common causes
Common causes include Faulty Turbocharger Boost Control.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 164
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 19, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P100A 2015 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Turbocharger Boost Control Signal Message Counter is Incorrect.
OBDII Code P100A 2015 GMC Sierra - Turbocharger Boost Control Signal Message Counter Incorrect - AutoCodes.com
P100A 2015 GMC Sierra Code - Turbocharger Boost Control Signal Message Counter Incorrect

What are the Possible Causes of the DTC P100A 2015 GMC Sierra?

  • Faulty Turbocharger Boost Control

How to Fix the DTC P100A 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P100A 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P100A 2015 GMC Sierra code?

Need more information on how to fix the P100A 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P100A 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P100A 2015 GMC Sierra Code

1. What does the OBDII code P100A mean on a 2015 GMC Sierra?

The P100A code indicates an issue with the turbocharger boost control signal, specifically that the message counter is incorrect or not synchronized properly.

2. What are the common symptoms of a P100A code in a 2015 GMC Sierra?

Symptoms may include reduced engine performance, poor acceleration, decreased fuel efficiency, and the check engine light turning on.

3. What causes the P100A code to appear on a 2015 GMC Sierra?

The code can be caused by faulty turbocharger control modules, wiring issues, communication errors between modules, or software glitches in the engine control module (ECM).

4. Can a faulty turbocharger cause the P100A code?

While the turbocharger itself may not be directly faulty, issues with the turbocharger control module, sensors, or wiring connected to it can trigger this code.

5. Is it safe to drive a 2015 GMC Sierra with the P100A code?

It’s not recommended to drive for extended periods with this code, as it may lead to reduced performance and potential damage to the turbocharger system.

6. How can I fix the P100A code on my 2015 GMC Sierra?

Start by inspecting the turbocharger control module, checking for loose or damaged wiring, and ensuring proper communication between the ECM and the turbo system. A software update or reprogramming may also be necessary.

7. Does the P100A code require replacing the turbocharger control module?

Not always. First, rule out wiring or communication issues and confirm the module is faulty before replacing it.

8. Can a bad ECM cause the P100A code?

Yes, a malfunctioning ECM can fail to properly communicate with the turbocharger control module, leading to this code.

9. How much does it cost to repair the P100A code on a 2015 GMC Sierra?

Repair costs vary but can range from $150 to $1,000, depending on whether the issue is wiring-related, requires module replacement, or involves software updates.

10. Will clearing the code fix the P100A issue?

Clearing the code may temporarily turn off the check engine light, but the root cause must be addressed to prevent the code from returning.

Discuss the causes and fixes for P100A 2015 GMC Sierra OBDII Code

Code P100A 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play