AutoCodes – Honda – P1009 2020 Honda CR-V

P1009 2020 Honda CR-V Code - Variable Valve Timing Control Advance Malfunction

Quick Answer

The variable Valve Timing Control (VTC) system controls the phase of the intake camshaft and exhaust camshaft. Common causes include Faulty Valve Timing Control (VTC) Actuator 'A', VTC Actuator 'A' harness is open or shorted, VTC Actuator 'A' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1009 2020 Honda CR-V indicates Variable Valve Timing Control Advance Malfunction.
Common causes: Common causes include Faulty Valve Timing Control (VTC) Actuator 'A', VTC Actuator 'A' harness is open or shorted, VTC Actuator 'A' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 185

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 23, 2025

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1009 2020 Honda CR-V Description

The variable Valve Timing Control (VTC) system controls the phase of the intake camshaft and exhaust camshaft. It uses oil pressure to operate the VTC actuator 'A' so the valve timing is optimized depending on driving conditions. The Powertrain Control Module (PCM) monitors the phase control command value and the actual phase value of intake camshaft using the Camshaft Position (CMP) Sensor 'A'. When an over-advanced camshaft phase angle, which the over-advanced angle is predetermined value greater than the commanded values, continues to exist while the VTC is either active or inactive or an advanced phase angle of the intake camshaft is greater than the predetermined value while the VTC is inactive, a malfunction is detected and a Diagnostic Trouble Code (DTC) is stored.

OBDII Code P1009 2020 Honda CR-V - Variable Valve Timing Control Advance Malfunction - AutoCodes.com — P1009 2020 Honda CR-V Code - Variable Valve Timing Control Advance Malfunction

What does this mean?

What are the Possible Causes of the DTC P1009 2020 Honda CR-V?

Faulty Valve Timing Control (VTC) Actuator 'A'
VTC Actuator 'A' harness is open or shorted
VTC Actuator 'A' circuit poor electrical connection
Cam chain elongation

How to Fix the DTC P1009 2020 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1009 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1009 2020 Honda CR-V code?

Need more information on how to fix the P1009 2020 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1009 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.