P1009 2014 Chevrolet Silverado Code - Fuel Pump Driver Control Module Temperature High Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1009 2014 Chevrolet Silverado indicates Fuel Pump Driver Control Module Temperature High Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1009 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P1009 2014 Chevrolet Silverado?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
How to Fix the DTC P1009 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1009 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1009 2014 Chevrolet Silverado code?
Need more information on how to fix the P1009 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1009 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1009 2014 Chevrolet Silverado Code
1. What does the OBDII code P1009 mean on a 2014 Chevrolet Silverado?
Code P1009 indicates that the Fuel Pump Driver Control Module (FPCM) has detected an issue with the temperature signal message counter being incorrect.
2. What are the common symptoms of code P1009 in a 2014 Chevrolet Silverado?
Symptoms may include difficulty starting the engine, rough idling, reduced fuel efficiency, or the illumination of the check engine light.
3. What causes the P1009 code to trigger?
The most common causes include a faulty Fuel Pump Driver Control Module, wiring issues such as damaged or corroded connectors, or software glitches in the FPCM.
4. Can I drive my 2014 Chevrolet Silverado with a P1009 code?
While the vehicle may still be drivable, ignoring the issue can lead to poor performance, potential stalling, or damage to the fuel system components.
5. How is the P1009 code diagnosed?
A mechanic will use a scan tool to confirm the code, inspect the wiring and connectors for damage, and test the FPCM for proper functionality.
6. What repairs are commonly needed to fix a P1009 code?
Repairs may include replacing the Fuel Pump Driver Control Module, repairing or replacing damaged wiring, or updating the FPCM software if a firmware issue is identified.
7. How much does it typically cost to fix a P1009 code on a 2014 Chevrolet Silverado?
The repair cost can range from $200 to $600, depending on whether the FPCM needs replacement or if wiring repairs are required.
8. Can a weak battery cause the P1009 code?
Yes, a weak or failing battery can cause communication issues within the FPCM, potentially triggering this code.
9. Is the P1009 code specific to Chevrolet Silverado trucks?
No, while the code can appear on other GM vehicles, the specific issue and symptoms may vary depending on the model and year.
10. Do I need to reprogram the Fuel Pump Driver Control Module after replacement?
Yes, in most cases, the new module will need to be programmed or calibrated to work with your vehicle’s systems.
Discuss the causes and fixes for P1009 2014 Chevrolet Silverado OBDII Code
Code P1009 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
