P1008 Dodge Code - Ignition Circuit High
Quick Answer
P1008 Dodge indicates Ignition Circuit High. Common causes for P1008 Dodge include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1008 Dodge indicates Ignition Circuit High.
- Common causes
- Common causes for P1008 Dodge include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1008 Dodge Description
How to Fix the DTC P1008 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1008 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1008 Dodge code?
Need more information on how to fix the P1008 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1008 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1008 Dodge Code
1. What does the OBDII code P1008 mean on a Dodge vehicle?
P1008 indicates an "Ignition Circuit High" fault, meaning the power or voltage in the ignition circuit is higher than expected.
2. What are common symptoms of the P1008 code on a Dodge?
Symptoms may include difficulty starting the engine, intermittent stalling, rough idling, or an illuminated check engine light.
3. What causes the P1008 code to appear on a Dodge?
Common causes include a faulty ignition switch, damaged wiring in the ignition circuit, a short to power, or a malfunctioning ignition relay.
4. Can the P1008 code cause damage if left unresolved?
Yes, ignoring the P1008 code can lead to further electrical issues, poor engine performance, or damage to ignition system components.
5. How do you diagnose the P1008 code on a Dodge?
Diagnosis involves checking the ignition circuit wiring and connectors, testing the ignition switch, and using a multimeter to verify voltage levels.
6. Can a weak battery cause the P1008 code?
A weak or failing battery is unlikely to cause this code, but electrical issues related to power supply in the ignition circuit could contribute.
7. How is the P1008 code fixed on a Dodge?
Repairs may include replacing a faulty ignition switch, repairing damaged wiring, replacing the ignition relay, or addressing any short circuits.
8. Is it safe to drive with the P1008 code active?
Driving with this code may be unsafe as it can cause engine stalling or starting issues, potentially leaving you stranded.
9. Does the P1008 code require reprogramming the vehicle's computer?
No, this code typically does not require reprogramming but rather focuses on repairing physical ignition circuit issues.
10. What tools are needed to troubleshoot the P1008 code?
Basic tools include a multimeter, a diagnostic scan tool, and possibly a wiring diagram for the vehicle's ignition system.
Discuss the causes and fixes for P1008 Dodge OBDII Code
Code P1008 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
