P1005 2015 GMC Sierra Code - Fuel Pump Driver Control Module Enable Too Many Resets
Quick Answer
The fuel pump driver control module sends a message every 100 ms to the Engine Control Module (ECM) that indicates the amount of time elapsed since the last controller reset (power up or running reset). Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1005 2015 GMC Sierra indicates Fuel Pump Driver Control Module Enable Too Many Resets.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1005 2015 GMC Sierra Description
What are the Possible Causes of the DTC P1005 2015 GMC Sierra?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
How to Fix the DTC P1005 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1005 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1005 2015 GMC Sierra code?
Need more information on how to fix the P1005 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1005 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1005 2015 GMC Sierra Code
What does the OBDII code P1005 mean on a 2015 GMC Sierra?
P1005 indicates that the Fuel Pump Driver Control Module (FPCM) has experienced too many resets due to an internal fault or communication issue.
What are the common symptoms of code P1005 in a 2015 GMC Sierra?
Common symptoms include difficulty starting the engine, stalling, poor fuel efficiency, and a check engine light.
What causes code P1005 to be triggered?
The code is often caused by a faulty Fuel Pump Driver Control Module, wiring issues, loose connections, or a failing fuel pump.
Can a weak battery cause the P1005 code on a GMC Sierra?
Yes, a weak or failing battery can cause voltage irregularities that may lead to the FPCM resetting too frequently.
How do you diagnose the P1005 code on a 2015 GMC Sierra?
Diagnosis includes scanning for additional codes, inspecting the FPCM and its wiring for damage or corrosion, and testing the fuel pump for proper operation.
Is it safe to drive a 2015 GMC Sierra with a P1005 code?
Driving with this code is not recommended, as it may result in poor performance, stalling, or further damage to the fuel system.
How do you fix the P1005 code on a 2015 GMC Sierra?
Repairs may involve replacing the Fuel Pump Driver Control Module, repairing damaged wiring, or addressing battery and voltage issues.
What tools are needed to fix the P1005 code?
Basic tools include an OBDII scanner, multimeter for testing voltage, and possibly replacement parts like the FPCM or wiring connectors.
How much does it cost to fix a P1005 code on a GMC Sierra?
Repair costs vary, but replacing the FPCM typically ranges from $200 to $500, including parts and labor.
Can a software update fix the P1005 code on a 2015 GMC Sierra?
In some cases, a software update for the vehicle’s control module may resolve communication issues causing this code. Consult a dealership for more information.
Discuss the causes and fixes for P1005 2015 GMC Sierra OBDII Code
Code P1005 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
