P1000 KIA - System Diagnosis Incomplete

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

P1000 KIA Possible Causes

  • The vehicle is new from the factory.
  • Battery or Powertrain Control Module (PCM) had recently been disconnected.
  • An OBD monitor failure occurred before completion of an OBD drive cycle.
  • PCM Diagnostic Trouble Codes (DTC) have recently been cleared with a scan tool.

First diagnose P1000 KIA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1000 KIA code

    Labor: 1.0

    The cost of diagnosing the P1000 KIA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1000 KIA code detected?

If DTC P1000 is triggered after DTCs have been cleared, all engine management OBD diagnostic monitor drive cycles have not been cleared.

P1000 KIA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1000 Kia Description

The On Board Diagnostic (OBD) monitors are performed during the OBD Drive Cycle. P1000 is stored in continuous memory if any of the OBD monitors do not carry out their full diagnostic check.
OBDII Code P1000 Kia - System Diagnosis Incomplete - AutoCodes.com

P1000 KIA More Information

Need more information on how to fix the P1000 KIA code?
Get Access to Factory Service Manuals

Need more help?

Get the P1000 Kia code diagnosed by a professional: Find a repair shop in your area

Related Information

P1000 KIA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1000 Kia code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧