P1000 2006 Ford Fusion Code - On Board Diagnostic System Readiness Test Not Complete
Quick Answer
The On-Board Diagnostic (OBD) monitors are performed during the OBD Drive Cycle. Common causes include The vehicle is new from the factory, Battery or Powertrain Control Module (PCM) had recently been disconnected, An OBD monitor failure occurred before completion of an OBD drive cycle. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1000 2006 Ford Fusion indicates On Board Diagnostic System Readiness Test Not Complete.
- Common causes
- Common causes include The vehicle is new from the factory, Battery or Powertrain Control Module (PCM) had recently been disconnected, An OBD monitor failure occurred before completion of an OBD drive cycle.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1000 2006 Ford Fusion Description
What are the Possible Causes of the DTC P1000 2006 Ford Fusion?
- The vehicle is new from the factory.
- Battery or Powertrain Control Module (PCM) had recently been disconnected.
- An OBD monitor failure occurred before completion of an OBD drive cycle.
- PCM Diagnostic Trouble Codes (DTC) have recently been cleared with a scan tool.
How to Fix the DTC P1000 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1000 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1000 2006 Ford Fusion code?
Need more information on how to fix the P1000 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1000 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1000 2006 Ford Fusion Code
1. What does the OBDII code P1000 on a 2006 Ford Fusion mean?
The P1000 code indicates that the On Board Diagnostic (OBD) system readiness test is incomplete.
2. What are the common symptoms of the P1000 code on a 2006 Ford Fusion?
There are usually no noticeable symptoms associated with the P1000 code, as it is more of an informational code rather than a specific fault code.
3. What causes the On Board Diagnostic system readiness test to not complete on a 2006 Ford Fusion?
The most common reason for the OBD system readiness test not completing is when the vehicle's computer has recently been reset or the battery has been disconnected.
4. How do I repair the P1000 code on a 2006 Ford Fusion?
To resolve the P1000 code, you will need to perform a drive cycle. This involves driving the vehicle under various conditions to allow the OBD system to complete its self-checks.
5. How long does it take to complete the drive cycle for the P1000 code on a 2006 Ford Fusion?
The drive cycle can take anywhere from a few days to a week, depending on how often and how far you drive the vehicle. It is recommended to drive the car for a mix of city and highway driving to ensure all readiness monitors are completed.
6. Can I pass a smog or emissions test with the P1000 code present on my 2006 Ford Fusion?
No, having the P1000 code present will likely result in a failed emissions test, as it indicates that the vehicle's OBD system has not completed its self-checks.
7. Will disconnecting the battery reset the P1000 code on a 2006 Ford Fusion?
Disconnecting the battery may temporarily clear the code, but it will likely reappear once the OBD system detects that the readiness tests are incomplete.
8. Is it safe to continue driving my 2006 Ford Fusion with the P1000 code?
Yes, it is generally safe to drive the vehicle with the P1000 code, as it does not indicate a serious problem with the car's operation.
9. Can a mechanic reset the P1000 code on a 2006 Ford Fusion?
A mechanic can clear the code using a diagnostic tool, but it is important to address the underlying cause of the incomplete readiness test to prevent the code from reoccurring.
10. How can I prevent the P1000 code from coming back on my 2006 Ford Fusion?
To prevent the P1000 code from reappearing, avoid resetting the vehicle's computer or disconnecting the battery unless absolutely necessary. Drive the car regularly to allow the OBD system to complete its self-checks.
Discuss the causes and fixes for P1000 2006 Ford Fusion OBDII Code
-
I recently purchased a 2006 ford fusion. I have a hyper tough wireless code reader and It said car had misfire on all cylinders and fuel injectors are all faulty. I changed the plugs but haven't yet done the injectors. But I checked to codes again and that was only code left to deal with besides the p1000-ff and p1000. But I can't clear the codes until I can drive it, unless there's another way? Is there?
-
No there is no other way. The P1000 code means that there was a code, and you need to drive it until complete the cycle.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
