AutoCodes – Chevrolet – P0D66 Chevrolet

P0D66 Chevrolet Code - Hybrid/EV Battery Pack Cooling Fan Enable Circuit High Voltage

Quick Answer

The hybrid/EV battery pack cooling fan draws air through the hybrid/EV battery pack to control the temperature of the hybrid/EV battery pack. Common causes include Faulty Hybrid/EV Battery Pack Cooling Fan, Hybrid/EV Battery Pack Cooling Fan harness is open or shorted, Hybrid/EV Battery Pack Cooling Fan circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0D66 Chevrolet indicates Hybrid/EV Battery Pack Cooling Fan Enable Circuit High Voltage.
Common causes: Common causes include Faulty Hybrid/EV Battery Pack Cooling Fan, Hybrid/EV Battery Pack Cooling Fan harness is open or shorted, Hybrid/EV Battery Pack Cooling Fan circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 748

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0D66 Chevrolet Description

The hybrid/EV battery pack cooling fan draws air through the hybrid/EV battery pack to control the temperature of the hybrid/EV battery pack. To operate, the cooling fan receives an enable signal from the starter/generator control module. The enable control is controlled by a discrete high side driver in the starter/generator control module. When the enable control circuit is high, the fan will be enabled. The fan speed is controlled by a fan control circuit from the starter/generator control module, by changing the duty cycle. The maximum fan speed is 3900 RPM. Hybrid/EV battery pack cooling fan enable circuit open and short to voltage diagnostics run continuously until hybrid/EV battery pack cooling fan is enabled to run while short to ground runs after it is enabled to run. These diagnostics detect and report a failure of the fan to enable circuits.

OBDII Code P0D66 Chevrolet - Hybrid/EV Battery Pack Cooling Fan Enable Circuit High Voltage - AutoCodes.com — P0D66 Chevrolet Code - Hybrid/EV Battery Pack Cooling Fan Enable Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0D66 Chevrolet?

Faulty Hybrid/EV Battery Pack Cooling Fan
Hybrid/EV Battery Pack Cooling Fan harness is open or shorted
Hybrid/EV Battery Pack Cooling Fan circuit poor electrical connection
Faulty Starter/Generator Control Module

How to Fix the DTC P0D66 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0D66 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0D66 Chevrolet code?

Need more information on how to fix the P0D66 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0D66 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0D66 Chevrolet Code

1. What does the OBDII code P0D66 mean on a Chevrolet?

P0D66 indicates a problem with the hybrid or EV battery pack cooling fan enable circuit, specifically detecting high voltage.

2. What are the symptoms of the P0D66 code in a Chevrolet?

Common symptoms include reduced hybrid or EV performance, illuminated check engine light, overheating of the battery pack, and potential activation of limp mode.

3. What causes the P0D66 code to appear?

The code can be triggered by a faulty cooling fan, damaged wiring or connectors in the cooling fan circuit, a malfunctioning battery management system, or a short circuit causing high voltage.

4. Can I drive my Chevrolet with the P0D66 code?

Driving with the P0D66 code is not recommended, as it may lead to overheating of the battery pack, reduced efficiency, or potential damage to the hybrid/EV system.

5. How is the P0D66 code diagnosed?

Technicians diagnose the code by scanning for related error codes, inspecting the cooling fan and its wiring, testing the fan enable circuit for voltage inconsistencies, and checking the battery management system.

6. What repairs are needed to fix the P0D66 code?

Repairs may include replacing a faulty cooling fan, repairing damaged wiring or connectors, or reprogramming/updating the battery management system.

7. How much does it cost to fix the P0D66 code on a Chevrolet?

Repair costs vary depending on the issue, but replacing the cooling fan might cost $300-$800, while wiring repairs could range from $100-$400.

8. Can a bad cooling fan cause the P0D66 code?

Yes, a malfunctioning or completely failed cooling fan is a common cause of this code, as it can disrupt the proper operation of the battery pack cooling system.

9. How can I prevent the P0D66 code from recurring?

Regular maintenance, ensuring the cooling fan and battery pack system are clean and free of debris, and addressing wiring issues promptly can help prevent the code from recurring.

10. Will clearing the P0D66 code solve the issue?

Clearing the code will temporarily turn off the check engine light, but the underlying issue must be repaired to prevent the code from returning.