P0CE6 CHEVROLET - Hybrid/EV Battery Pack Coolant Control Valve Position Sensor Circuit Low Voltage
P0CE6 CHEVROLET Possible Causes
- Faulty Hybrid/EV Battery Pack Coolant Control Valve Position Sensor
- Hybrid/EV Battery Pack Coolant Control Valve Position Sensor harness is open or shorted
- Hybrid/EV Battery Pack Coolant Control Valve Position Sensor circuit poor electrical connection
First diagnose P0CE6 CHEVROLET code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0CE6 CHEVROLET code
Labor: 1.0The cost of diagnosing the P0CE6 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
P0CE6 CHEVROLET Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0ce6 Chevrolet DescriptionThe valve provides position feedback to the hybrid/EV powertrain control module 2 based on a potentiometer in the valve. The hybrid/EV powertrain control module 2 uses this feedback to monitor the valve position. Different valve positions correspond to different resistance values. The hybrid/EV powertrain control module 2 determines the resistance values corresponding to the end stop positions of the valve by moving the valve to an end-stop and back to its original position when the vehicle is first turned on. This is referred to as the hybrid/EV powertrain control module 2
P0CE6 CHEVROLET More InformationNeed more information on how to fix the P0CE6 CHEVROLET code?
Get Access to Factory Service Manuals
Need more help?Get the P0ce6 Chevrolet code diagnosed by a professional: Find a repair shop in your area
P0CE6 CHEVROLET CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0ce6 Chevrolet code? Have you replaced any parts?
Any information is appreciated. Thanks