P0CC1 Code - Drive Motor Coolant Pump Control Circuit
Quick Answer
The Starter/Generator Control Module coolant pump is a single speed ON/OFF pump that circulates coolant through the auxiliary radiator and the starter/generator to control the temperature of the starter/generator. Common causes include Faulty Starter/Generator Coolant Pump, Starter/Generator Coolant Pump harness is open or shorted, Starter/Generator Coolant Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0CC1 indicates Drive Motor Coolant Pump Control Circuit.
- Common causes
- Common causes include Faulty Starter/Generator Coolant Pump, Starter/Generator Coolant Pump harness is open or shorted, Starter/Generator Coolant Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0CC1 Description
The Starter/Generator Control Module uses the exponentially weighted moving average to calculate temperature fluctuations in the starter/generator cooling system. In addition, this diagnostic compares the temperature rate of change by a slope calculation within a set time when the Starter/Generator Control Module coolant pump turns ON. This diagnostic runs once after pump turns ON. If the temperature changes over time too quickly, the Starter/Generator Control Module will indicate a fault.
What are the Possible Causes of the DTC P0CC1?
- Faulty Starter/Generator Coolant Pump
- Starter/Generator Coolant Pump harness is open or shorted
- Starter/Generator Coolant Pump circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC P0CC1?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0CC1 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0CC1 code?
Need more information on how to fix the P0CC1 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0CC1 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0CC1 Buick β Drive Motor Coolant Pump Control Circuit
- P0CC1 Cadillac β Drive Motor Coolant Pump Control Circuit
- P0CC1 Chevrolet β Drive Motor Coolant Pump Control Circuit
- P0CC1 GMC β Drive Motor Coolant Pump Control Circuit
Frequently Asked Questions about P0CC1 Code
What does the OBDII code P0CC1 mean?
The OBDII code P0CC1 indicates a problem with the drive motor coolant pump control circuit, which is responsible for regulating the temperature of the electric motor in hybrid or electric vehicles.
What are the common symptoms of the P0CC1 code?
Common symptoms include overheating of the drive motor, reduced vehicle performance, warning lights on the dashboard, and in some cases, a complete loss of power.
What could cause the P0CC1 code to trigger?
Possible causes include a faulty coolant pump, wiring issues such as shorts or open circuits, a defective control module, or issues with the vehicle's temperature sensors.
How can I diagnose the P0CC1 code?
To diagnose the P0CC1 code, use an OBDII scanner to confirm the code, inspect the drive motor coolant pump and its wiring, check for any related codes, and test the functionality of the coolant pump.
What are the possible repairs for a P0CC1 code?
Repairs may include replacing the drive motor coolant pump, repairing or replacing damaged wiring, replacing the control module, or addressing any related cooling system issues.
Can I drive my vehicle with the P0CC1 code?
It is not recommended to drive your vehicle with the P0CC1 code, as it can lead to overheating of the drive motor, which may cause further damage to the vehicle.
How much does it typically cost to fix a P0CC1 code?
Repair costs can vary widely depending on the specific issue, but typical expenses may range from $100 to $1,000 or more, depending on whether parts need replacement or if extensive diagnostic work is required.
Is the P0CC1 code specific to hybrid or electric vehicles?
Yes, the P0CC1 code is primarily related to hybrid and electric vehicles, as these vehicles utilize a drive motor coolant pump to maintain optimal operating temperatures.
What should I do if I have the P0CC1 code?
If you have the P0CC1 code, it is best to have your vehicle inspected by a qualified mechanic who can perform a thorough diagnostic and recommend appropriate repairs.
Discuss the causes and fixes for P0CC1 OBDII Code
Code P0CC1 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.