P0C9E CADILLAC Code - 14V Power Module Output Current Sensor Circuit Low Current
|P0C9E CADILLAC code possible causes
- Faulty Starter Generator Control Module
- Starter Generator Control Module harness is open or shorted
- Starter Generator Control Module circuit poor electrical connection
|How do I fix the P0C9E CADILLAC code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the P0C9E CADILLAC code
Labor: 1.0The cost of diagnosing the P0C9E CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P0C9E CADILLAC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|P0C9E CADILLAC code descriptionThe generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. These three control modules are non serviceable and are part of the generator control module.
The 14V power module has 2 current sensors, one for input and one for output current measurements. This diagnostic checks the output current sensor. These current sensors are internal to the 14V power module and are not serviced separately from the generator control module.
|Need more information with the P0C9E CADILLAC code?Need more information on how to fix the P0C9E CADILLAC code? Get Access to Factory Service Manuals
|Need help with a P0C9E CADILLAC code?Get the P0c9e Cadillac code diagnosed by a professional: Find a repair shop in your area
|P0C9E CADILLAC code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0c9e Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks