AutoCodesChevrolet – P0C89 2016 Chevrolet Silverado

P0C89 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 9 Performance

Quick Answer

Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0C89 2016 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 9 Performance.
Common causes
Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 310
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 22, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0C89 2016 Chevrolet Silverado Description

Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. The non-serviceable battery temperature sensors are located within the battery sections. Two temperature sensors are located in each battery section. The temperature sensor is a variable resistor that measures the temperature of the battery cell group. The hybrid/EV interface control module supplies 5 V to the signal circuit and is a ground for the low reference circuit. The battery temperature sensor resistance changes with battery temperature. As the temperature decreases, the sensor resistance increases. As the temperature increases, the sensor resistance decreases.
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
OBDII Code P0C89 2016 Chevrolet Silverado - Hybrid/EV Battery Temperature Sensor 9 Performance - AutoCodes.com
P0C89 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 9 Performance

What are the Possible Causes of the DTC P0C89 2016 Chevrolet Silverado?

  • Faulty Hybrid/EV Battery Assembly
  • Hybrid/EV Battery Assembly harness is open or shorted
  • Hybrid/EV Battery Assembly circuit poor electrical connection
  • Faulty Hybrid/EV Battery Interface Control Module

How to Fix the DTC P0C89 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0C89 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0C89 2016 Chevrolet Silverado code?

Need more information on how to fix the P0C89 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0C89 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0C89 2016 Chevrolet Silverado Code

What does the OBDII code P0C89 mean for a 2016 Chevrolet Silverado?

The P0C89 code indicates an issue with the performance of Hybrid/EV Battery Temperature Sensor 9, which monitors the temperature of the hybrid/EV battery pack.

What are the common symptoms of code P0C89 in a 2016 Chevrolet Silverado?

Symptoms may include the hybrid system warning light turning on, reduced fuel efficiency, limited hybrid/EV functionality, or the vehicle entering a fail-safe or limp mode.

What causes the P0C89 code in a 2016 Chevrolet Silverado?

Possible causes include a faulty battery temperature sensor, wiring or connector issues in the sensor circuit, a malfunctioning hybrid battery control module, or overheating of the battery pack.

Can I drive my 2016 Chevrolet Silverado with the P0C89 code?

It is not recommended to drive the vehicle for extended periods with this code, as it could indicate overheating or improper monitoring of the hybrid battery, potentially leading to further damage.

How do I diagnose the P0C89 code in a 2016 Chevrolet Silverado?

Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the battery temperature sensor and its wiring, checking for loose or corroded connections, and testing the sensor's functionality.

How is the P0C89 code fixed in a 2016 Chevrolet Silverado?

Repairs may include replacing the faulty battery temperature sensor, repairing or replacing damaged wiring, cleaning or reconnecting connectors, or reprogramming/updating the hybrid battery control module.

What tools are needed to fix the P0C89 code on a 2016 Chevrolet Silverado?

You may need an OBDII scanner, a multimeter for testing electrical components, and basic hand tools to access and replace the sensor or repair wiring.

How much does it cost to fix the P0C89 code on a 2016 Chevrolet Silverado?

Repair costs can vary but may range from $100 to $500, depending on whether the issue involves replacing the sensor, repairing wiring, or addressing control module problems.

Can a software update fix the P0C89 code?

In some cases, a software update for the hybrid battery control module may resolve the issue, especially if the problem is related to incorrect calibration or programming.

What maintenance can help prevent the P0C89 code in a 2016 Chevrolet Silverado?

Regularly inspecting the hybrid battery system, ensuring proper cooling, and addressing any warning lights promptly can help prevent issues with the battery temperature sensors.

Discuss the causes and fixes for P0C89 2016 Chevrolet Silverado OBDII Code

Code P0C89 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play