P0C83 2018 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 8 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C83 2018 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 8 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C83 2018 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0C83 2018 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C83 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C83 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C83 2018 GMC Sierra code?
Need more information on how to fix the P0C83 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C83 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C83 2018 GMC Sierra Code
What does OBDII code P0C83 indicate in a 2018 GMC Sierra?
Code P0C83 points to a "Hybrid/EV Battery Temperature Sensor 8 Circuit Low Voltage," indicating a problem with the sensor or its electrical circuit.
What are the common symptoms of code P0C83?
Symptoms may include reduced hybrid or EV performance, warning lights on the dashboard, and potential overheating or undercooling of the battery.
What causes the P0C83 code to appear?
Causes can include a faulty battery temperature sensor, damaged wiring or connectors, or issues with the hybrid battery control module.
How can I diagnose the P0C83 code?
Use a diagnostic scanner to confirm the code, inspect the wiring and connectors for damage, and test the temperature sensor for proper function.
Can I drive my 2018 GMC Sierra with the P0C83 code active?
Driving is possible, but it’s not recommended as it may lead to reduced performance or damage to the hybrid battery system.
How do I fix the P0C83 code?
Repairs may involve replacing the faulty temperature sensor, repairing damaged wiring or connectors, or reprogramming the control module.
How much does it cost to repair code P0C83?
Repair costs vary but typically range from $150 to $500 depending on the nature of the issue and labor costs.
Will clearing the code resolve the problem?
Clearing the code without addressing the underlying issue will only temporarily remove the warning and the problem will likely return.
Is the P0C83 code specific to hybrid or EV models?
Yes, this code is specific to vehicles with hybrid or electric powertrains equipped with battery temperature sensors.
Can a faulty battery temperature sensor affect fuel economy?
Yes, if the sensor is not functioning properly, it can impact the efficiency of the hybrid system and reduce fuel economy.
Discuss the causes and fixes for P0C83 2018 GMC Sierra OBDII Code
Code P0C83 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
