P0C82 Buick Code - Hybrid/EV Battery Temperature Sensor 8 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C82 Buick indicates Hybrid/EV Battery Temperature Sensor 8 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C82 Buick Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0C82 Buick?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C82 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C82 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C82 Buick code?
Need more information on how to fix the P0C82 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C82 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C82 Buick Code
1. What does the OBDII code P0C82 mean on a Buick?
The P0C82 code indicates a performance issue with Hybrid/EV Battery Temperature Sensor 8, which monitors the temperature of a specific part of the battery pack.
2. What are common symptoms of the P0C82 code on a Buick?
Symptoms may include reduced hybrid or EV performance, warning lights on the dashboard, limited battery charging, or overheating of the battery pack.
3. What causes the P0C82 code to appear on a Buick?
Common causes include a faulty temperature sensor, wiring issues, a damaged battery module, or problems with the hybrid battery control module.
4. Can I continue driving my Buick with the P0C82 code active?
It’s not recommended to drive for extended periods, as ignoring the issue could lead to further battery damage or reduced vehicle performance.
5. How is the P0C82 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the sensor and wiring for damage, and test the voltage and resistance of the temperature sensor.
6. How do you fix the P0C82 code on a Buick?
Repairs may involve replacing the faulty temperature sensor, repairing damaged wiring, or recalibrating the battery control module.
7. How much does it cost to repair a P0C82 code on a Buick?
Repair costs vary, but replacing a temperature sensor typically ranges from $100 to $300, while more extensive issues like battery module repairs can be significantly more.
8. Can a P0C82 code be caused by software issues in a Buick?
Yes, outdated or corrupted software in the hybrid battery control module can sometimes trigger this code and may require a software update.
9. Will disconnecting the battery clear the P0C82 code on a Buick?
Disconnecting the battery might temporarily clear the code, but the underlying issue will persist and the code will likely return.
10. How can I prevent the P0C82 code from occurring on my Buick?
Regular maintenance, keeping the battery pack clean and cool, and addressing any hybrid system warnings promptly can help prevent this issue.
Discuss the causes and fixes for P0C82 Buick OBDII Code
Code P0C82 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
