P0C82 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 8 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C82 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 8 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C82 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0C82 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C82 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C82 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C82 2014 Chevrolet Silverado code?
Need more information on how to fix the P0C82 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C82 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C82 2014 Chevrolet Silverado Code
1. What does the OBDII code P0C82 mean on a 2014 Chevrolet Silverado?
The P0C82 code indicates an issue with the performance of Hybrid/EV Battery Temperature Sensor 8, which monitors the temperature of a specific section of the hybrid/EV battery system.
2. What are common symptoms of the P0C82 code in a 2014 Chevrolet Silverado?
Symptoms may include reduced fuel efficiency, limited hybrid/EV system performance, warning lights on the dashboard, or the vehicle entering limp mode.
3. What causes the P0C82 code to appear on a 2014 Chevrolet Silverado?
Common causes include a faulty temperature sensor, damaged sensor wiring, poor electrical connections, or issues within the hybrid/EV battery itself.
4. How do I diagnose the P0C82 code on my 2014 Chevrolet Silverado?
Diagnosis involves scanning for codes, visually inspecting the sensor and wiring, testing the sensor’s resistance with a multimeter, and checking for voltage at the sensor connector.
5. Can I drive my 2014 Chevrolet Silverado with the P0C82 code?
It is not recommended, as it may lead to further damage to the hybrid/EV battery system or reduced performance of the vehicle.
6. How do I fix the P0C82 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, and ensuring all electrical connections are secure and free of corrosion.
7. Is the P0C82 code specific to the 2014 Chevrolet Silverado?
No, this code can appear in other hybrid or electric vehicles, but the exact repair steps may vary depending on the make and model.
8. How much does it cost to repair the P0C82 code on a 2014 Chevrolet Silverado?
Repair costs can range from $100 to $500+, depending on whether the issue is with the sensor, wiring, or hybrid/EV battery.
9. Can a hybrid/EV battery issue trigger the P0C82 code?
Yes, problems within the hybrid/EV battery, such as overheating or uneven temperature distribution, can trigger this code.
10. Do I need to reprogram the ECU after fixing the P0C82 code on my 2014 Chevrolet Silverado?
In most cases, reprogramming is not required, but clearing the code and performing a test drive to ensure proper operation is recommended.
Discuss the causes and fixes for P0C82 2014 Chevrolet Silverado OBDII Code
Code P0C82 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
