P0C37 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 6 Circuit Erratic
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C37 2016 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 6 Circuit Erratic.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C37 2016 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
What are the Possible Causes of the DTC P0C37 2016 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C37 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C37 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C37 2016 Chevrolet Silverado code?
Need more information on how to fix the P0C37 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C37 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C37 2016 Chevrolet Silverado Code
1. What does the OBDII code P0C37 mean on a 2016 Chevrolet Silverado?
The P0C37 code indicates an issue with the Hybrid/EV Battery Temperature Sensor 6 Circuit, which is behaving erratically or providing inconsistent readings.
2. What are the symptoms of code P0C37 in a 2016 Chevrolet Silverado?
Symptoms may include the check engine light turning on, reduced vehicle performance, hybrid system warnings, or irregular battery charging and cooling behavior.
3. What causes the P0C37 code to appear?
Common causes include a faulty battery temperature sensor, damaged wiring or connectors in the circuit, a malfunctioning battery control module, or excessive heat affecting the sensor.
4. Can the P0C37 code cause further damage if ignored?
Yes, ignoring this code can lead to overheating of the hybrid battery, reduced system efficiency, or long-term battery damage.
5. How can I diagnose the P0C37 code on my 2016 Chevrolet Silverado?
Use a diagnostic scanner to confirm the code, visually inspect the wiring and connectors for damage, and test the battery temperature sensor for proper operation.
6. Is the battery temperature sensor 6 specific to a particular part of the hybrid battery?
Yes, the sensor monitors the temperature in a specific section of the hybrid battery to ensure balanced and safe operation.
7. Can I drive my Silverado with the P0C37 code active?
Driving with this code is not recommended, as it may compromise the hybrid system and lead to overheating or reduced performance.
8. How much does it cost to repair the P0C37 code on a 2016 Chevrolet Silverado?
Repair costs vary but may range from $100 to $500, depending on whether the issue is with the sensor, wiring, or battery control module.
9. Can a software update fix the P0C37 code?
In some cases, a software update for the battery control module may resolve the issue, but this is only applicable if the problem is related to programming errors.
10. What tools are needed to fix the P0C37 code?
Tools may include an OBDII scanner, a multimeter to check electrical circuits, and basic hand tools for accessing the sensor and wiring.
Discuss the causes and fixes for P0C37 2016 Chevrolet Silverado OBDII Code
Code P0C37 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
