P0C36 2017 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C36 2017 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C36 2017 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is less than -69°C (-92°F).
What are the Possible Causes of the DTC P0C36 2017 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C36 2017 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C36 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C36 2017 Chevrolet Silverado code?
Need more information on how to fix the P0C36 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C36 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C36 2017 Chevrolet Silverado Code
1. What does the OBDII code P0C36 mean on a 2017 Chevrolet Silverado?
The code P0C36 indicates an issue with the Hybrid/EV Battery Temperature Sensor 6 Circuit, specifically that it has a high voltage condition.
2. What are the common symptoms of a P0C36 code in a 2017 Chevrolet Silverado?
Symptoms may include a check engine light, reduced hybrid/electric vehicle performance, irregular battery charging or cooling behavior, and potential powertrain malfunctions.
3. What causes a P0C36 code in the 2017 Chevrolet Silverado?
Common causes include a faulty battery temperature sensor, damaged or corroded wiring or connectors, an issue with the hybrid battery control module, or a short to voltage in the circuit.
4. Can I drive my 2017 Chevrolet Silverado with a P0C36 code?
It’s not recommended, as the code may indicate a problem with the battery management system, which could lead to further damage or unsafe driving conditions.
5. How do I diagnose a P0C36 code in my 2017 Chevrolet Silverado?
Start by inspecting the battery temperature sensor wiring and connectors for damage or corrosion. Use a multimeter to check circuit voltage and resistance, and test the sensor itself for proper operation.
6. How is a P0C36 code fixed on a 2017 Chevrolet Silverado?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, or reprogramming/updating the hybrid battery control module if needed.
7. How much does it cost to repair a P0C36 code on a 2017 Chevrolet Silverado?
Repair costs vary but may range from $150 to $500 depending on whether the sensor, wiring, or control module needs replacement.
8. Can a dead or failing hybrid battery cause a P0C36 code?
While not a direct cause, a failing hybrid battery can stress sensors and circuits, potentially leading to this code.
9. Is the P0C36 code specific to the 2017 Chevrolet Silverado?
No, this code may appear in other hybrid or EV vehicles, but its diagnosis and repair procedures may vary depending on the make and model.
10. Will clearing the code with an OBDII scanner fix the P0C36 issue?
Clearing the code may turn off the check engine light temporarily, but the issue will persist unless the underlying problem is resolved.
Discuss the causes and fixes for P0C36 2017 Chevrolet Silverado OBDII Code
Code P0C36 2017 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
