P0C36 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C36 2016 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C36 2016 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is less than -69°C (-92°F).
What are the Possible Causes of the DTC P0C36 2016 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C36 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C36 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C36 2016 Chevrolet Silverado code?
Need more information on how to fix the P0C36 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C36 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C36 2016 Chevrolet Silverado Code
1. What does the OBDII code P0C36 mean on a 2016 Chevrolet Silverado?
P0C36 indicates an issue with the Hybrid/EV Battery Temperature Sensor 6, specifically a high voltage signal in its circuit.
2. What are the common symptoms of the P0C36 code?
Common symptoms include an illuminated check engine light, reduced hybrid/EV performance, overheating of the battery, or the vehicle entering limp mode.
3. What causes the P0C36 code to appear?
The code can be caused by a faulty temperature sensor, damaged wiring or connectors in the sensor circuit, a short to power, or issues with the battery control module.
4. Can I drive my 2016 Chevrolet Silverado with the P0C36 code active?
It's not recommended to drive with this code active, as it could indicate battery overheating risks or reduced hybrid/EV system performance.
5. How do you diagnose the P0C36 code?
Diagnosis involves scanning the vehicle with an OBDII scanner, inspecting the temperature sensor wiring and connections, and testing the sensor and circuit for continuity and proper voltage.
6. How is the P0C36 code fixed?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, or addressing issues in the battery control module.
7. Can a software issue cause the P0C36 code?
Yes, outdated or corrupted software in the battery control module can potentially trigger this code.
8. How much does it cost to fix the P0C36 code?
The cost varies depending on the issue but typically ranges from $100 to $500, including diagnostics, sensor replacement, or wiring repairs.
9. How can I prevent the P0C36 code from recurring?
Regular maintenance of the hybrid/EV battery system, ensuring wiring is intact, and addressing any warning lights promptly can help prevent recurrence.
10. Is the P0C36 code specific to Chevrolet Silverado vehicles?
No, the P0C36 code can appear on other hybrid or EV vehicles, but the repair steps and symptoms may vary by make and model.
Discuss the causes and fixes for P0C36 2016 Chevrolet Silverado OBDII Code
Code P0C36 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.