P0C36 2014 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C36 2014 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C36 2014 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is less than -69°C (-92°F).
What are the Possible Causes of the DTC P0C36 2014 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C36 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C36 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C36 2014 GMC Sierra code?
Need more information on how to fix the P0C36 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C36 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C36 2014 GMC Sierra Code
1. What does the OBDII code P0C36 mean on a 2014 GMC Sierra?
The P0C36 code indicates a problem with the Hybrid/EV Battery Temperature Sensor 6 Circuit, specifically a high voltage condition.
2. What are the symptoms of code P0C36 in a 2014 GMC Sierra?
Common symptoms include an illuminated check engine light, reduced fuel efficiency, limited power mode, or irregular hybrid battery performance.
3. What causes the P0C36 code to appear?
The code can be caused by a faulty battery temperature sensor, damaged wiring or connectors, or issues within the hybrid battery control module.
4. Can I drive my 2014 GMC Sierra with the P0C36 code active?
Driving with this code active is not recommended, as it may affect the hybrid battery system's performance and could lead to further damage.
5. How do I fix the P0C36 code on a 2014 GMC Sierra?
Repairs may involve replacing the faulty battery temperature sensor, repairing damaged wiring, or addressing issues with the hybrid battery control module.
6. How can I diagnose the P0C36 code on my GMC Sierra?
Use an OBDII scanner to confirm the code, inspect the battery temperature sensor and its wiring for damage, and test the sensor’s voltage output.
7. Is the P0C36 code specific to GMC Sierra hybrid models?
Yes, this code is specific to hybrid or EV models, as it pertains to the battery temperature monitoring system.
8. What tools are needed to troubleshoot the P0C36 code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly access to the vehicle’s service manual for wiring diagrams.
9. How much does it cost to fix the P0C36 code on a 2014 GMC Sierra?
Repair costs can vary, but replacing a temperature sensor may cost $100-$300, including parts and labor. Wiring repairs or module replacement could cost more.
10. Can a low hybrid battery charge cause the P0C36 code?
No, this code is related to a sensor circuit issue and not directly caused by the battery's charge level.
Discuss the causes and fixes for P0C36 2014 GMC Sierra OBDII Code
Code P0C36 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
