P0C36 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C36 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 6 Circuit High Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C36 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is less than -69°C (-92°F).
What are the Possible Causes of the DTC P0C36 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C36 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C36 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C36 2014 Chevrolet Silverado code?
Need more information on how to fix the P0C36 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C36 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C36 2014 Chevrolet Silverado Code
1. What does the OBDII code P0C36 mean on a 2014 Chevrolet Silverado?
The P0C36 code indicates an issue with the Hybrid/EV Battery Temperature Sensor 6 Circuit, specifically detecting a high voltage condition.
2. What are the common symptoms of P0C36 in a 2014 Chevrolet Silverado?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, limited hybrid or EV performance, and potential battery overheating warnings.
3. What causes the P0C36 code to appear?
Common causes include a faulty battery temperature sensor, damaged wiring or connectors in the sensor circuit, or a malfunction in the hybrid/EV battery control module.
4. Can I drive my 2014 Chevrolet Silverado with the P0C36 code?
It’s not recommended to drive the vehicle for extended periods with this code, as it may lead to battery overheating or reduced hybrid system performance.
5. How do I diagnose the P0C36 code?
Diagnosis involves checking the battery temperature sensor, inspecting wiring and connectors for damage, and using a scan tool to monitor sensor data and verify the high voltage condition.
6. How is the P0C36 code fixed?
Repairs may include replacing the faulty battery temperature sensor, repairing or replacing damaged wiring, or reprogramming/updating the hybrid control module if needed.
7. What tools are required to address the P0C36 code?
You’ll need a compatible OBDII scanner, a multimeter to test circuit voltage and continuity, and potentially specialized tools for accessing the hybrid battery system.
8. How much does it cost to repair the P0C36 code?
Repair costs vary but typically range from $150 to $500, depending on whether the issue is with the sensor, wiring, or control module.
9. Can a software issue trigger the P0C36 code?
Yes, outdated or corrupted hybrid system software can sometimes cause false high voltage readings and trigger this code.
10. Is the P0C36 code exclusive to the 2014 Chevrolet Silverado?
No, this code can appear on other hybrid or EV vehicles using similar diagnostic systems, but the specifics of the repair may vary.
Discuss the causes and fixes for P0C36 2014 Chevrolet Silverado OBDII Code
Code P0C36 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
