P0C35 2017 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 6 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C35 2017 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 6 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C35 2017 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0C35 2017 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C35 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C35 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C35 2017 GMC Sierra code?
Need more information on how to fix the P0C35 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C35 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C35 2017 GMC Sierra Code
1. What does the OBDII code P0C35 mean on a 2017 GMC Sierra?
P0C35 indicates a low voltage issue in the Hybrid/EV Battery Temperature Sensor 6 circuit, which monitors the temperature of a specific part of the hybrid/EV battery system.
2. What are the common symptoms of code P0C35 in a 2017 GMC Sierra?
Symptoms may include an illuminated check engine light, reduced hybrid/EV system performance, limited power mode, or overheating of the battery system.
3. What causes the P0C35 code to appear on a 2017 GMC Sierra?
Common causes include a faulty temperature sensor, damaged wiring or connectors in the sensor circuit, a short or open circuit, or issues with the battery control module.
4. Can I drive my 2017 GMC Sierra with a P0C35 code?
It is not recommended to drive for extended periods with this code, as it could lead to battery damage or reduced vehicle performance due to improper temperature monitoring.
5. How do I diagnose the P0C35 code on a 2017 GMC Sierra?
Diagnosis typically involves scanning for additional codes, inspecting the wiring and connectors for damage, testing the temperature sensor for proper operation, and checking the battery control module.
6. How do I fix the P0C35 code on my 2017 GMC Sierra?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the battery control module if necessary.
7. How much does it cost to repair the P0C35 code on a 2017 GMC Sierra?
Repair costs can vary but may range from $100 to $500, depending on whether the issue is a simple sensor replacement or more extensive wiring or module repairs.
8. What tools are needed to troubleshoot the P0C35 code?
You’ll need an OBDII scanner, a multimeter for testing voltage and continuity, and possibly wiring diagrams for the Hybrid/EV battery system.
9. Can a dead battery cause the P0C35 code on a 2017 GMC Sierra?
A dead or weak 12V auxiliary battery is unlikely to cause this code directly, but it could contribute to electrical issues that affect the hybrid/EV battery system.
10. Does the P0C35 code require professional repair, or can I fix it myself?
If you have experience with electrical diagnostics and access to the proper tools, you may be able to fix it yourself. Otherwise, it is best to consult a professional technician to avoid further damage.
Discuss the causes and fixes for P0C35 2017 GMC Sierra OBDII Code
Code P0C35 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
