P0C19 GMC Code - Drive Motor Torque Delivered Performance
Quick Answer
The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. Common causes include Faulty Starter Generator, Starter Generator harness is open or shorted, Starter Generator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C19 GMC indicates Drive Motor Torque Delivered Performance.
- Common causes
- Common causes include Faulty Starter Generator, Starter Generator harness is open or shorted, Starter Generator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C19 GMC Description
The starter generator also called the drive motor is controlled by the drive motor control module. The drive motor control module constantly monitors the requested torque and the delivered torque of the drive motor.
What are the Possible Causes of the DTC P0C19 GMC?
- Faulty Starter Generator
- Starter Generator harness is open or shorted
- Starter Generator circuit poor electrical connection
How to Fix the DTC P0C19 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C19 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C19 GMC code?
Need more information on how to fix the P0C19 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C19 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C19 GMC Code
1. What are the common symptoms of OBDII code P0C19 in a GMC vehicle?
The common symptoms of OBDII code P0C19 in a GMC vehicle include reduced power and acceleration, poor fuel efficiency, and potential stalling or hesitation during operation.
2. What are the possible causes of OBDII code P0C19 in a GMC vehicle?
Possible causes of OBDII code P0C19 in a GMC vehicle include issues with the drive motor, torque sensor malfunction, wiring or connector problems, or software-related issues.
3. How can I diagnose OBDII code P0C19 in my GMC vehicle?
Diagnosing OBDII code P0C19 in a GMC vehicle typically involves using a diagnostic scanner to retrieve the code, inspecting the drive motor components, checking for loose or damaged wiring, and performing a torque sensor calibration if needed.
4. Can I still drive my GMC vehicle with OBDII code P0C19?
It is not recommended to drive your GMC vehicle with OBDII code P0C19, as it can lead to further damage to the drive motor components and potentially compromise vehicle safety and performance.
5. How can I repair OBDII code P0C19 in my GMC vehicle?
Repairing OBDII code P0C19 in a GMC vehicle may involve replacing faulty drive motor components, repairing damaged wiring or connectors, performing a torque sensor calibration, and clearing the trouble code with a diagnostic scanner.
6. Is it possible to reset OBDII code P0C19 in a GMC vehicle without fixing the underlying issue?
While you can clear the trouble code temporarily, it is important to address the root cause of OBDII code P0C19 in a GMC vehicle to prevent the issue from recurring and potentially causing more severe problems.
7. How much does it cost to repair OBDII code P0C19 in a GMC vehicle?
The cost to repair OBDII code P0C19 in a GMC vehicle can vary depending on the extent of the issue, the parts needed for replacement, and labor costs. It is recommended to consult a professional mechanic for an accurate estimate.
8. Can a DIY enthusiast fix OBDII code P0C19 in a GMC vehicle?
While some simple inspections and repairs may be possible for a DIY enthusiast, diagnosing and repairing OBDII code P0C19 in a GMC vehicle often requires specialized tools and expertise. It is advisable to seek help from a qualified mechanic.
9. How long does it take to repair OBDII code P0C19 in a GMC vehicle?
The time required to repair OBDII code P0C19 in a GMC vehicle can vary depending on the specific issue and the availability of parts. Some repairs may be completed within a few hours, while others may take longer.
10. Are there any preventative measures to avoid OBDII code P0C19 in a GMC vehicle?
To prevent OBDII code P0C19 in a GMC vehicle, it is important to follow the manufacturer's recommended maintenance schedule, address any drive motor issues promptly, and avoid rough driving habits that may strain the vehicle's components.
Discuss the causes and fixes for P0C19 GMC OBDII Code
Code P0C19 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
