P0C05 GMC Code - Drive Motor Phase U-V-W Circuits
Quick Answer
The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C05 GMC indicates Drive Motor Phase U-V-W Circuits.
- Common causes
- Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C05 GMC Description
The drive motor control module operates the starter generator, also referred to as the drive motor. The drive motor control module controls the speed and output torque of the starter generator through the sequencing actuation of high current switching transistors called insulated gate bipolar transistors. Each insulated gate bipolar transistor assembly is monitored for overcurrent conditions.
What are the Possible Causes of the DTC P0C05 GMC?
- Faulty Starter Generator Control Module
- Starter Generator Control Module harness is open or shorted
- Starter Generator Control Module circuit poor electrical connection
How to Fix the DTC P0C05 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C05 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C05 GMC code?
Need more information on how to fix the P0C05 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C05 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C05 GMC Code
1. What are the common symptoms of OBDII code P0C05 GMC?
- Common symptoms include reduced power output, engine stalling, and potential issues with the electric drive motor.
2. What typically causes the OBDII code P0C05 GMC to appear?
- This code usually indicates a fault in the Drive Motor Phase U-V-W Circuits, which could be due to wiring issues, damaged components, or electrical faults.
3. How can I diagnose the cause of OBDII code P0C05 GMC?
- Diagnosing this code may require using a multimeter to test the continuity of the motor phase circuits, inspecting wiring for damage, and checking for loose connections.
4. Can I still drive my vehicle with OBDII code P0C05 GMC present?
- It is not recommended to drive your vehicle with this code active, as it can lead to further damage to the electric drive system and potentially cause safety hazards.
5. What are some repair tips for fixing OBDII code P0C05 GMC?
- Repair tips may include repairing or replacing damaged wiring, testing and replacing faulty components in the drive motor phase circuits, and ensuring all connections are secure.
6. Is it necessary to reset the OBDII code P0C05 GMC after making repairs?
- Yes, it is important to clear the code using an OBDII scanner after making repairs to see if the issue has been successfully resolved.
7. Are there any recalls or service bulletins related to OBDII code P0C05 GMC for GMC vehicles?
- It is recommended to check with your local GMC dealership or online resources for any relevant recalls or service bulletins related to this specific OBDII code.
8. Can a DIY mechanic fix OBDII code P0C05 GMC, or is professional help required?
- Depending on your skill level and access to tools, a DIY mechanic may be able to diagnose and repair this code. However, complex electrical issues may require professional assistance.
9. How can I prevent OBDII code P0C05 GMC from reoccurring in the future?
- Regularly inspecting and maintaining the electric drive system, keeping an eye on wiring integrity, and addressing any electrical issues promptly can help prevent this code from reoccurring.
10. Is OBDII code P0C05 GMC a serious issue that needs immediate attention?
- Yes, addressing this code promptly is important to prevent further damage to the electric drive system and ensure the vehicle operates safely and efficiently.
Discuss the causes and fixes for P0C05 GMC OBDII Code
Code P0C05 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
