AutoCodes – Generic – P0BF8

P0BF8 Code - Drive Motor 'B' Phase V Current Sensor Circuit High

Quick Answer

When three-phase alternating current flows through the three-phase windings of the stator coil, a rotating magnetic field is generated in MG2. Common causes include Faulty Hybrid Vehicle Motor Assembly, Hybrid Vehicle Motor Assembly harness is open or shorted, Hybrid Vehicle Motor Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0BF8 indicates Drive Motor 'B' Phase V Current Sensor Circuit High.
Common causes: Common causes include Faulty Hybrid Vehicle Motor Assembly, Hybrid Vehicle Motor Assembly harness is open or shorted, Hybrid Vehicle Motor Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,410

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0BF8 Description

When three-phase alternating current flows through the three-phase windings of the stator coil, a rotating magnetic field is generated in MG2. The system controls the rotation of the magnetic field in accordance with the rotating position and speed of the rotor. As a result, the permanent magnets provided in the rotor are pulled in the direction of rotation, generating torque. The generated torque is almost proportional to the amount of current. The system controls MG2 speed by regulating the frequency of the alternating current. Furthermore, the system properly controls the rotating magnetic field and the angle of the rotor magnets in order to generate high torque in an efficient manner, even at high speeds.

OBDII Code P0BF8 - Drive Motor 'B' Phase V Current Sensor Circuit High - AutoCodes.com — P0BF8 Code - Drive Motor 'B' Phase V Current Sensor Circuit High

What does this mean?

What are the Possible Causes of the DTC P0BF8?

Faulty Hybrid Vehicle Motor Assembly
Hybrid Vehicle Motor Assembly harness is open or shorted
Hybrid Vehicle Motor Assembly circuit poor electrical connection

How to Fix the DTC P0BF8?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0BF8 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0BF8 code?

Need more information on how to fix the P0BF8 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0BF8 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0BF8 Code

What does the OBDII code P0BF8 mean?

The P0BF8 code indicates an issue with the Drive Motor 'B' Phase V Current Sensor Circuit, specifically that it is reading a voltage or current level higher than expected.

What are the common symptoms of the P0BF8 code?

Symptoms may include reduced vehicle performance, an illuminated Check Engine Light, decreased fuel efficiency, or limited electric drive functionality in hybrid or electric vehicles.

What causes the P0BF8 code to appear?

Possible causes include a faulty current sensor, damaged wiring or connectors in the circuit, issues with the motor control module, or electrical interference.

Can I still drive my car with the P0BF8 code?

Driving with this code is not recommended, as it could lead to reduced power, potential damage to the drive motor, or safety concerns in hybrid or electric vehicles.

How is the P0BF8 code diagnosed?

A technician will use a scan tool to confirm the code, inspect the wiring and connections, test the current sensor, and check for any related faults in the motor control module.

What repairs can fix the P0BF8 code?

Repairs may include replacing the current sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the motor control module if necessary.

Is the P0BF8 code specific to hybrid or electric vehicles?

Yes, this code is typically associated with hybrid or electric vehicles that have drive motors utilizing phase current sensors for monitoring.

How much does it cost to repair the P0BF8 code?

Repair costs vary depending on the issue but may range from $100 for wiring repairs to $1,000 or more if the motor control module or current sensor needs replacement.

Can a faulty battery cause the P0BF8 code?

While unlikely, a weak or malfunctioning battery could indirectly contribute to electrical issues that might trigger the code.

How can I prevent the P0BF8 code from occurring?

Regular maintenance, inspecting electrical connections, and using a diagnostic scan tool to monitor vehicle health can help prevent issues leading to this code.