P0BF0 GMC Code - Drive Motor Phase W Current Sensor Circuit High Voltage
Quick Answer
The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0BF0 GMC indicates Drive Motor Phase W Current Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0BF0 GMC Description
This is an internal fault detection of the generator control module. This fault is handled inside the generator control module and no external circuits are involved.
What are the Possible Causes of the DTC P0BF0 GMC?
- Faulty Starter Generator Control Module
- Starter Generator Control Module harness is open or shorted
- Starter Generator Control Module circuit poor electrical connection
How to Fix the DTC P0BF0 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0BF0 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0BF0 GMC code?
Need more information on how to fix the P0BF0 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0BF0 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0BF0 GMC Code
1. What are the common symptoms of OBDII code P0BF0 GMC (Drive Motor Phase W Current Sensor Circuit High Voltage)?
The common symptoms of this code may include reduced electric drive motor performance, illuminated check engine light, and potential inability to start the vehicle.
2. What are the possible causes of OBDII code P0BF0 GMC?
Possible causes of this code may include a faulty drive motor phase W current sensor, damaged wiring or connectors in the current sensor circuit, or issues with the electric drive motor itself.
3. How serious is OBDII code P0BF0 GMC?
This code is considered serious as it can affect the performance and drivability of the vehicle. It is recommended to address this issue promptly to prevent further complications.
4. Can I still drive my vehicle with OBDII code P0BF0 GMC?
It is not advisable to continue driving the vehicle with this code present, as it may lead to further damage to the electric drive motor system. It's best to have the issue diagnosed and repaired by a qualified technician.
5. How can I diagnose OBDII code P0BF0 GMC?
Diagnosing this code typically involves using a scan tool to retrieve the code and then conducting further testing of the drive motor phase W current sensor and related components to pinpoint the exact cause of the issue.
6. What are some repair tips for OBDII code P0BF0 GMC?
Repair tips may include inspecting the wiring and connectors in the current sensor circuit for any damage, testing the drive motor phase W current sensor for proper operation, and addressing any underlying issues with the electric drive motor.
7. Can I reset OBDII code P0BF0 GMC on my own?
While you can clear the code with an OBDII scan tool, it is important to address the root cause of the issue to prevent the code from reoccurring. It is recommended to have the vehicle properly diagnosed and repaired.
8. How much does it cost to fix OBDII code P0BF0 GMC?
The cost of repairing this code can vary depending on the exact cause of the issue, labor rates in your area, and the cost of any necessary parts. It is best to consult with a mechanic for an accurate estimate.
9. Will OBDII code P0BF0 GMC cause my vehicle to fail an emissions test?
Yes, this code can cause your vehicle to fail an emissions test as it indicates a problem with the electric drive motor system, which can impact emissions control.
10. How can I prevent OBDII code P0BF0 GMC from occurring in the future?
Regular maintenance of the electric drive motor system, including inspection of sensors and wiring, can help prevent issues that may trigger this code. Additionally, addressing any warning signs promptly can help prevent more serious problems.
Discuss the causes and fixes for P0BF0 GMC OBDII Code
Code P0BF0 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
