AutoCodes – GMC – P0BEE GMC

P0BEE GMC Code - Drive Motor Phase W Current Sensor Performance

Quick Answer

The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0BEE GMC indicates Drive Motor Phase W Current Sensor Performance.
Common causes: Common causes include Faulty Starter Generator Control Module, Starter Generator Control Module harness is open or shorted, Starter Generator Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 677

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 20, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0BEE GMC Description

The generator control module also called the starter generator control module is comprised of the following three control modules; the hybrid powertrain control module, 14 volt power module and the drive motor control module. These three control modules are non serviceable and are part of the generator control module.
This is an internal fault detection of the generator control module. This fault is handled inside the generator control module and no external circuits are involved.

OBDII Code P0BEE GMC - Drive Motor Phase W Current Sensor Performance - AutoCodes.com — P0BEE GMC Code - Drive Motor Phase W Current Sensor Performance

What does this mean?

What are the Possible Causes of the DTC P0BEE GMC?

Faulty Starter Generator Control Module
Starter Generator Control Module harness is open or shorted
Starter Generator Control Module circuit poor electrical connection

How to Fix the DTC P0BEE GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0BEE GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0BEE GMC code?

Need more information on how to fix the P0BEE GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0BEE GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0BEE GMC Code

1. What are the common symptoms of OBDII code P0BEE GMC (Drive Motor Phase W Current Sensor Performance)?

The common symptoms include reduced engine power, engine stalling, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P0BEE GMC?

The code P0BEE GMC typically indicates issues with the drive motor phase W current sensor, such as sensor malfunction, wiring issues, or a faulty drive motor.

3. How can I diagnose the cause of OBDII code P0BEE GMC?

Diagnosing the code may require using a diagnostic scanner to retrieve freeze frame data, testing the drive motor phase W current sensor for proper operation, and inspecting the wiring for any damage or loose connections.

4. What are some repair tips for addressing OBDII code P0BEE GMC?

Repair tips may include checking and repairing the drive motor phase W current sensor, inspecting and repairing any damaged wiring, and clearing the trouble codes to see if the issue reoccurs.

5. Can I continue driving my vehicle with OBDII code P0BEE GMC?

It is not recommended to continue driving the vehicle with this code present, as it can lead to further damage and potentially unsafe driving conditions.

6. How much does it typically cost to repair OBDII code P0BEE GMC?

The cost of repairing this code can vary depending on the underlying cause, but it may involve sensor replacement, wiring repairs, or other related repairs.

7. Will OBDII code P0BEE GMC cause permanent damage to my vehicle if left unaddressed?

Leaving this code unaddressed can potentially cause further damage to the drive motor or other related components, so it is best to address the issue promptly.

8. Can I reset the OBDII code P0BEE GMC myself?

You can attempt to clear the code using an OBDII scanner, but it is important to diagnose and repair the underlying issue to prevent the code from reappearing.

9. Is OBDII code P0BEE GMC a common issue in GMC vehicles?

This code may occur in certain GMC vehicles with drive motor phase W current sensor issues, but its frequency can vary depending on the model and age of the vehicle.

10. How long does it typically take to repair OBDII code P0BEE GMC?

The repair time can vary depending on the extent of the issue and the availability of parts, but it may take a few hours to a full day to diagnose and repair the problem.