P0BC6 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 5 Circuit Erratic
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0BC6 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 5 Circuit Erratic.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0BC6 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
What are the Possible Causes of the DTC P0BC6 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0BC6 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0BC6 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0BC6 2014 Chevrolet Silverado code?
Need more information on how to fix the P0BC6 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0BC6 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0BC6 2014 Chevrolet Silverado Code
What does the OBDII code P0BC6 mean for a 2014 Chevrolet Silverado?
1. The P0BC6 code indicates an issue with the Hybrid/EV Battery Temperature Sensor 5 Circuit, specifically erratic readings or intermittent signals. 2.
What are the common symptoms of the P0BC6 code in a 2014 Chevrolet Silverado?
Symptoms may include an illuminated check engine light, reduced hybrid or EV performance, poor fuel efficiency, or the vehicle entering a limp mode. 3.
What causes the P0BC6 code to trigger in a 2014 Chevrolet Silverado?
The code can be caused by a faulty battery temperature sensor, damaged wiring or connectors, a malfunctioning hybrid battery control module, or an electrical short or open circuit. 4.
Can I drive my 2014 Chevrolet Silverado with the P0BC6 code active?
It is not recommended to drive the vehicle extensively with this code active, as it may lead to reduced performance or further damage to the hybrid/EV battery system. 5.
How do I diagnose the P0BC6 code on a 2014 Chevrolet Silverado?
Start by inspecting the battery temperature sensor and its wiring for damage or loose connections. Use an OBDII scanner to verify the code and monitor sensor data for irregularities. 6.
What repairs are needed to fix the P0BC6 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the faulty battery temperature sensor, repairing damaged wiring or connectors, or reprogramming or replacing the hybrid battery control module if necessary. 7.
How much does it cost to repair the P0BC6 code on a 2014 Chevrolet Silverado?
Repair costs vary but may range from $150 to $600, depending on whether the sensor, wiring, or control module needs replacement. 8.
Can a weak hybrid/EV battery cause the P0BC6 code?
While a weak battery is not a direct cause, it could lead to sensor malfunctions or erratic readings, potentially triggering this code. 9.
Will resetting the check engine light clear the P0BC6 code permanently?
Resetting the light may temporarily clear the code, but unless the underlying issue is resolved, the code will likely return. 10.
Is the P0BC6 code specific to the 2014 Chevrolet Silverado?
No, the P0BC6 code can appear on other hybrid or EV vehicles, but its specific implications and repairs depend on the make and model.
Discuss the causes and fixes for P0BC6 2014 Chevrolet Silverado OBDII Code
Code P0BC6 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
