P0BC4 2014 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 5 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0BC4 2014 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 5 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0BC4 2014 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0BC4 2014 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0BC4 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0BC4 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0BC4 2014 Chevrolet Silverado code?
Need more information on how to fix the P0BC4 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0BC4 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0BC4 2014 Chevrolet Silverado Code
1. What does the OBDII code P0BC4 mean for a 2014 Chevrolet Silverado?
P0BC4 indicates a "Hybrid/EV Battery Temperature Sensor 5 Circuit Low Voltage," meaning the vehicle's control module has detected an abnormally low voltage from the fifth temperature sensor in the hybrid/EV battery system.
2. What are the common symptoms of the P0BC4 code in a 2014 Chevrolet Silverado?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, limited hybrid system performance, or the vehicle entering limp mode.
3. What causes the P0BC4 code to appear in a 2014 Chevrolet Silverado?
Common causes include a faulty battery temperature sensor, damaged or corroded wiring, a loose or poor electrical connection, or a malfunctioning hybrid battery control module.
4. Can driving with the P0BC4 code damage my 2014 Chevrolet Silverado?
Driving for extended periods may worsen the issue or cause further damage to the hybrid battery system, so it’s best to address the problem promptly.
5. How do I diagnose the P0BC4 code in a 2014 Chevrolet Silverado?
Diagnosis typically involves using a scan tool to monitor live data, visually inspecting the sensor and wiring, and testing the sensor's resistance and voltage output.
6. How do I fix the P0BC4 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, securing loose connections, or reprogramming/updating the hybrid battery control module.
7. How much does it cost to repair the P0BC4 code on a 2014 Chevrolet Silverado?
Repair costs vary, but replacing a temperature sensor typically ranges from $100 to $300, while wiring repairs or control module replacements can be more expensive.
8. Can a dead hybrid battery cause the P0BC4 code in my Silverado?
While a completely failed hybrid battery is not a direct cause, issues within the battery pack, such as damaged cells, could contribute to triggering the code.
9. What tools do I need to troubleshoot the P0BC4 code in a 2014 Silverado?
You’ll need an OBDII scan tool capable of reading hybrid system codes, a multimeter for electrical testing, and possibly a repair manual for wiring diagrams.
10. How urgent is it to fix the P0BC4 code on my 2014 Chevrolet Silverado?
It’s important to address the issue quickly, as prolonged driving with this code could lead to reduced hybrid system performance or damage to the battery pack.
Discuss the causes and fixes for P0BC4 2014 Chevrolet Silverado OBDII Code
Code P0BC4 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
