P0BC3 2016 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 5 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0BC3 2016 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 5 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0BC3 2016 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0BC3 2016 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0BC3 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0BC3 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0BC3 2016 GMC Sierra code?
Need more information on how to fix the P0BC3 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0BC3 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0BC3 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P0BC3 in a 2016 GMC Sierra Hybrid/EV?
- Common symptoms include decreased fuel efficiency, reduced power output, and potential illumination of the check engine light.
2. What does the OBDII code P0BC3 indicate in a 2016 GMC Sierra Hybrid/EV?
- This code specifically refers to the performance of Hybrid/EV Battery Temperature Sensor 5 in the vehicle.
3. What are possible causes of OBDII code P0BC3 appearing in a 2016 GMC Sierra Hybrid/EV?
- Potential causes include sensor malfunctions, wiring issues, software glitches, or problems with the hybrid/EV battery itself.
4. How can I diagnose the Hybrid/EV Battery Temperature Sensor 5 Performance issue in my GMC Sierra?
- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the sensor and related wiring, and testing the battery temperature sensor's functionality.
5. Can I continue driving my 2016 GMC Sierra with the P0BC3 code present?
- It is not recommended to ignore the code, as it can lead to further damage or performance issues with the hybrid/EV system. It's best to address the problem promptly.
6. Are there any DIY repair tips for fixing the Hybrid/EV Battery Temperature Sensor 5 Performance issue?
- DIY repair may involve checking and cleaning sensor connections, ensuring proper insulation of wiring, or replacing the sensor if necessary. However, complex repairs may require professional assistance.
7. How much does it typically cost to repair OBDII code P0BC3 in a 2016 GMC Sierra Hybrid/EV?
- Repair costs can vary depending on the exact cause of the issue. Simple fixes like sensor replacement may cost a few hundred dollars, while more extensive repairs could be more expensive.
8. Will resetting the OBDII code P0BC3 in my 2016 GMC Sierra make it go away permanently?
- Resetting the code without addressing the underlying cause will only temporarily clear the check engine light. The issue needs to be diagnosed and fixed to prevent the code from reappearing.
9. Can extreme weather conditions affect the performance of the Hybrid/EV Battery Temperature Sensor in a 2016 GMC Sierra?
- Yes, extreme temperatures can impact sensor performance and trigger the P0BC3 code. It's important to keep the hybrid/EV system well-maintained in varying weather conditions.
10. Is it advisable to seek professional help for diagnosing and repairing OBDII code P0BC3 in a 2016 GMC Sierra Hybrid/EV?
- Yes, due to the complexity of hybrid/EV systems and the importance of accurate diagnosis, it is recommended to consult a qualified mechanic or dealership specializing in hybrid vehicles for proper repair and maintenance.
Discuss the causes and fixes for P0BC3 2016 GMC Sierra OBDII Code
Code P0BC3 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
