AutoCodes – Buick – P0B97 Buick

P0B97 Buick Code - Hybrid/Electric Vehicle Battery 19 Circuit Low Voltage

Quick Answer

The Hybrid/Electric Vehicle battery pack contains 288 cells. Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0B97 Buick indicates Hybrid/Electric Vehicle Battery 19 Circuit Low Voltage.
Common causes: Common causes include Faulty Hybrid/Electric Vehicle Battery Pack, Faulty Hybrid/Electric Vehicle Battery Interface Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 903

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 08, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0B97 Buick Description

The Hybrid/Electric Vehicle battery pack contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the hybrid/EV battery pack assembly. These cell groups are electrically connected in-series. Each individual cell group is rated at 3.7 V, for a nominal system voltage of 355 V direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are individually serviceable components.
The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybrid/EV battery interface control modules. Voltage sense circuits are attached to each individual cell group, and these sense circuits terminate at a connector located on the top surface of the battery section. A serviceable auxiliary battery wiring harness joins this connector to a hybrid/EV battery interface control module, also located on the top surface of the battery section. The hybrid/EV battery interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one hybrid/EV battery interface control module located on battery sections one and two, and two hybrid/EV battery interface control modules associated with battery section three. The hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.

OBDII Code P0B97 Buick - Hybrid/Electric Vehicle Battery 19 Circuit Low Voltage - AutoCodes.com — P0B97 Buick Code - Hybrid/Electric Vehicle Battery 19 Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0B97 Buick?

Faulty Hybrid/Electric Vehicle Battery Pack
Faulty Hybrid/Electric Vehicle Battery Interface Control Module

How to Fix the DTC P0B97 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0B97 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0B97 Buick code?

Need more information on how to fix the P0B97 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0B97 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0B97 Buick Code

1. What does the OBDII code P0B97 mean for a Buick?

The P0B97 code indicates a low voltage issue in the Hybrid/Electric Vehicle Battery 19 Circuit, which refers to one of the specific battery cell groups in the hybrid or electric vehicle's battery pack.

2. What are common symptoms of the P0B97 code?

Symptoms may include reduced fuel efficiency, limited electric driving range, the hybrid system warning light turning on, or the vehicle entering a limp mode.

3. What causes the P0B97 code in a Buick?

Common causes include a faulty battery cell, damaged or corroded wiring in the circuit, a malfunctioning battery control module, or poor connections in the battery pack.

4. Can the P0B97 code damage my vehicle if left unaddressed?

Yes, prolonged use with this code can further degrade the battery, reduce vehicle performance, and lead to higher repair costs if the issue worsens.

5. How is the P0B97 code diagnosed?

A technician will use a scan tool to check the code, inspect the battery pack and wiring for damage or corrosion, and test the voltage and resistance in the affected circuit.

6. Can I drive my Buick with the P0B97 code active?

Driving with this code is not recommended as it may lead to reduced performance or further damage to the hybrid battery system.

7. What repairs are needed to fix the P0B97 code?

Repairs may include replacing the faulty battery cell, repairing or replacing damaged wiring, cleaning corroded connections, or replacing the battery control module if needed.

8. How much does it cost to fix the P0B97 code on a Buick?

The cost depends on the specific issue but can range from $200 for wiring repairs to several thousand dollars if the battery pack needs replacement.

9. Can a software update resolve the P0B97 code?

In some cases, a software update for the battery control module may help, but this is less common and depends on the specific vehicle model and issue.

10. How can I prevent the P0B97 code from recurring?

Regular maintenance, keeping the battery cooling system clean, and addressing electrical issues promptly can help prevent this code from recurring.