P0AEC GMC Code - Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AEC GMC indicates Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AEC GMC Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is intermittent or has changed by 10°C (18°F) or greater for 4 out of 5 seconds.
What are the Possible Causes of the DTC P0AEC GMC?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AEC GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AEC GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AEC GMC code?
Need more information on how to fix the P0AEC GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AEC GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0AEC 2014 GMC Sierra — Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
- P0AEC 2015 GMC Sierra — Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
- P0AEC 2016 GMC Sierra — Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
- P0AEC 2017 GMC Sierra — Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
- P0AEC 2018 GMC Sierra — Hybrid/EV Battery Temperature Sensor 4 Circuit Erratic
Frequently Asked Questions about P0AEC GMC Code
What does the OBDII code P0AEC mean on a GMC vehicle?
The P0AEC code indicates an issue with the Hybrid/EV Battery Temperature Sensor 4 Circuit, specifically erratic readings or performance.
What are the common symptoms of the P0AEC code?
Common symptoms include illumination of the check engine light, reduced hybrid or electric vehicle performance, and potential battery overheating or cooling issues.
What causes the P0AEC code to appear?
This code can be caused by a faulty temperature sensor, damaged wiring or connectors in the sensor circuit, or issues with the hybrid/EV battery control module.
Can I continue driving my GMC with the P0AEC code?
Driving with this code is not recommended, as it may lead to improper battery temperature management and potential damage to the hybrid/EV system.
How do I diagnose the P0AEC code?
Start by inspecting the temperature sensor wiring and connectors for damage or corrosion, then use a scan tool to monitor sensor readings and test the circuit.
What tools are needed to fix the P0AEC code?
You may need a multimeter, an OBDII scan tool, and potentially replacement parts like a new temperature sensor or wiring components.
How much does it cost to repair the P0AEC code?
The cost can vary depending on the issue but typically ranges from $100 to $500, including diagnostics, parts, and labor.
Can a software update fix the P0AEC code?
In rare cases, a software update for the hybrid/EV control module may resolve the issue, but this is less common than physical repairs.
What happens if the P0AEC code is ignored?
Ignoring this code can lead to inefficient battery temperature regulation, reduced battery life, and potential safety risks.
Is replacing the hybrid/EV battery necessary to fix the P0AEC code?
Replacing the battery is usually not necessary unless the battery itself is damaged; the issue is typically isolated to the sensor or its circuit.
Discuss the causes and fixes for P0AEC GMC OBDII Code
Code P0AEC GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
