P0AE9 2016 Chevrolet Silverado Code - Hybrid/EV Battery Temperature Sensor 4 Performance
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0AE9 2016 Chevrolet Silverado indicates Hybrid/EV Battery Temperature Sensor 4 Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0AE9 2016 Chevrolet Silverado Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the difference between a single battery temperature sensor and an average of the other battery temperature sensors is greater than 25°C (45°F).
What are the Possible Causes of the DTC P0AE9 2016 Chevrolet Silverado?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0AE9 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0AE9 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0AE9 2016 Chevrolet Silverado code?
Need more information on how to fix the P0AE9 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0AE9 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0AE9 2016 Chevrolet Silverado Code
1. What does the OBDII code P0AE9 mean for a 2016 Chevrolet Silverado?
The P0AE9 code indicates an issue with the performance of Hybrid/EV Battery Temperature Sensor 4 in the vehicle.
2. What are the symptoms of the P0AE9 code in a 2016 Chevrolet Silverado?
Symptoms may include a check engine light, reduced hybrid/electric performance, overheating warnings, or abnormal battery behavior.
3. What causes the P0AE9 code to appear?
Common causes include a faulty temperature sensor, damaged wiring or connectors, or an issue with the hybrid battery pack.
4. Can I drive my 2016 Chevrolet Silverado with the P0AE9 code?
It’s not recommended to drive the vehicle for an extended period, as improper battery temperature monitoring can lead to overheating or reduced performance.
5. How do I diagnose the P0AE9 code?
Diagnosis typically involves using a scan tool to verify the code, checking the temperature sensor’s readings, and inspecting the wiring and connectors for damage.
6. How much does it cost to fix the P0AE9 code?
Repair costs vary but may range from $150 to $500, depending on whether the temperature sensor, wiring, or related components need replacement.
7. Can a software update fix the P0AE9 code?
In rare cases, a software update may resolve the issue if it's related to incorrect sensor calibration, but typically, hardware repairs are needed.
8. How do I reset the P0AE9 code after repairs?
Use an OBDII scan tool to clear the code after confirming the issue has been resolved.
9. What happens if I ignore the P0AE9 code?
Ignoring the code can lead to reduced battery performance, potential damage to the hybrid system, or safety risks due to overheating.
10. Does the P0AE9 code always mean the sensor is faulty?
No, the issue could also stem from wiring problems, connector issues, or inaccuracies in the battery management system.
Discuss the causes and fixes for P0AE9 2016 Chevrolet Silverado OBDII Code
Code P0AE9 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
